Replaces

1998-03 Toyota Sienna Exterior Door Handle - 1ADHS00246

These replacement exterior door handles are just what you need to get your vehicle in good form again!

Specifications:

  • Door handle set includes:
    • (1) - LF (Driver Side) Front
    • (1) - RF (Passenger Side) Front
    • (1) - LF (Driver Side) Side Sliding
    • (1) - RF (Passenger Side) Side Sliding
    • (1) - Rear Liftgate
  • Correct for models that HAVE Key Holes in the side sliding door handles
  • Comes black
    • can be painted by buyer to match or installed as is
  • Replaces dealer part numbers: 692300-8010C0, 692200-8010-C0, 69220-08010-A0, 69210-08010-C0, 69090-08010, 6923008010C0, 6922008010C0, 6922008010A0, 6921008010C0, 6909008010
  • Direct replacements
  • Install just as the originals do
  • Built to strict quality control standards

These handles make great replacements and have good cost savings over the individual dealer handles!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the tailgate hatch handle (1:00)
    • Use a screwdriver to remove the grommet located above the pull.
    • Remove the three 10 mm bolts.
    • Pull off the panel.
    • Unclip the latch handle.
    • Remove the three 10 mm nuts securing the back panel.
    • Unscrew the two screws anchoring the handle to the back panel.
  2. step : Install the new handle (4:15)
    • Screw the handle into the back panel.
    • Bolt the three 10 mm bolts back in to anchor the back panel to the door.
    • Clip the latch handle mechanism back into place.
    • Clip the tailgate panel back on.
    • Bolt in the three 10 mm bolts and put the grommets back over the bolt cavities.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2003 Toyota Sienna Exterior Door Handle 5 Piece Set for Models with Sliding Door Handles with Lock Provision

This part replaces:

  • OE # 6923008010C0
  • OE # 6909008010
Part #: 1ADHS00246

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:14 min)