Replaces

1998-03 Dodge Durango Tail Light Bulb Socket Pair - 1ALTP00433

Specifications:

  • Comes as a Pair
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement for either side
  • Built to strict quality control standards

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight Assembly (0:55)
    • Remove the two Phillips screws that secure the taillight.
    • Pull the taillight out.
    • Disconnect the harness.
  2. step : Changing a Bulb (1:30)
    • Twist out the socket.
    • Pull the bulb out.
    • Push the new bulb in.
    • Twist the socket back into place.
  3. step : Replacing the Taillight (2:08)
    • Twist the sockets into your new taillight.
    • Reconnect the harness.
    • Line up the taillight and press it into place.
    • Replace the two Phillips screws.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2003 Dodge Durango Tail Light Bulb Socket Pair

This part replaces:

  • Dorman 923-034
Part #: 1ALTP00433

How-to Video:

(03:45 min)