This replacement tail light is just what you need to get your Toyota Corolla in good looking form again!

This Toyota tail light features the following specifications:

  • LH (driver's side)
  • Mounts on the quarter (1/4) panel
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Does not include bulbs or wiring
  • Red and amber in color

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Toyota Corolla tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Changing a Bulb (0:24)
    • Pry out the upper plug on the panel.
    • Turn the Phillips plug out.
    • Pull back the insulation.
    • Twist the socket out.
    • Pull the bulb out.
    • Put the new bulb in and twist the socket into place.
  2. step : Removing the Taillight Assembly (1:22)
    • Remove the three 10mm nuts from the back of the taillight assembly.
    • Pull the taillight out and off.
    • Disconnect the harness.
  3. step : Replacing the Taillight Assembly (2:33)
    • Reconnect the harness.
    • Line up the taillight and press it into place.
    • Replace the three 10mm nuts.
    • Replace the insulation.
    • Replace the two plugs.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Toyota Corolla Outer Tail Light Driver Side

This part replaces:

  • Partslink TO2800121
  • Hollander 166-58920L
  • OE # 8156102070
  • TYC 11-5078-00
  • DEPO 312-1931L-AF
Part #: 1ALTL00331

How-to Video:

(04:02 min)