This replacement mirror is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Power mirror
  • Injection molded Gloss Black plastic housing
  • Sail mount design - Mounts in the corner of the door
  • Direct replacement mirror
  • Built to strict quality control standards
  • Non-Heated
  • Non-Folding

We have noticed that there are many inferior quality mirrors on the market. We have researched other mirror manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket mirrors available. So don't be fooled by cheaper made imitation mirrors. Go with superior quality!

This mirror makes a great replacement and has substantial cost savings over a dealer unit.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing Door Handle (0:32)
    • Remove the Phillips screw
    • Slide handle forward and out.
    • Using a screwdriver pry the clip and push the handle up and off the rod.
  2. step : Removing Door Panel (1:08)
    • Pry the switch panel up and disconnect the lead.
    • Pry up the armrest tab and remove the door trim panel
    • Use a Phillips head to turn the clip and pry it till it pops out.
    • Remove the two screws.
    • Pull the door panel off
  3. step : Removing The Mirror (2:50)
    • Locate the lead and press the button on the back to release it.
    • Remove the three 10 mm nuts
  4. step : Reinstallation of Mirror and Door Panel (4:33)
    • Reinstall in reverse order.
    • Thread 10 mm bolt stops by hand so they are not over tightened
    • Line up door panel clips and push it in, making sure that the lock rod and harness are coming through.
    • Install two Phillips screws in armrest, push armrest into place.
    • Reconnect power window switch and slide the back in first and push the front down into place.
    • Reinstall door handle and push into place.
    • Put the trim panel near window back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Toyota Corolla Power Gloss Black Mirror Driver Side

This part replaces:

  • Partslink TO1320129
  • Hollander 128-61307L
  • OE # 8794002190C0
  • Dorman 955-455
  • TYC 5230132
Part #: 1AMRE00370

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:09 min)