This replacement mirror is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
  • Power mirror
  • Injection molded Smooth Black plastic housing
    • can be painted by buyer to match or installed as is
  • Sail mount design - Mounts in the corner of the door
  • Direct replacement mirror
  • Built to strict quality control standards
  • Non-Heated
  • Non-Folding

This mirror makes a great replacement and has good cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Mirror Color / Finish: Smooth Black - Paint to Match
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing Door Handle (0:32)
    • Remove the Phillips screw
    • Slide handle forward and out.
    • Using a screwdriver pry the clip and push the handle up and off the rod.
  2. step : Removing Door Panel (1:08)
    • Pry the switch panel up and disconnect the lead.
    • Pry up the armrest tab and remove the door trim panel
    • Use a Phillips head to turn the clip and pry it till it pops out.
    • Remove the two screws.
    • Pull the door panel off
  3. step : Removing The Mirror (2:50)
    • Locate the lead and press the button on the back to release it.
    • Remove the three 10 mm nuts
  4. step : Reinstallation of Mirror and Door Panel (4:33)
    • Reinstall in reverse order.
    • Thread 10 mm bolt stops by hand so they are not over tightened
    • Line up door panel clips and push it in, making sure that the lock rod and harness are coming through.
    • Install two Phillips screws in armrest, push armrest into place.
    • Reconnect power window switch and slide the back in first and push the front down into place.
    • Reinstall door handle and push into place.
    • Put the trim panel near window back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent Mirror
All I had to do was paint and install it. Thank you for saving me money for such a quality mirror that beats Toyota's and for a margin of the price. Love you guys.
July 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Toyota Corolla Power Smooth Black - Paint to Match Mirror Driver Side
Part #: 1AMRE02407

How-to Video:

(07:09 min)