Specifications:

  • Brand New Sway Bar Links
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Raise and secure the vehicle (1:04)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (1:45)
    • Use a wrench to remove the nuts on the top and bottom of the stabilizer link.
    • Use a second wrench to add leverage to the first one you are using.
    • Secure the stabilizer link with the adjustable wrench to secure a Torx bit to remove the nuts the rest of the way with your wrench.
    • Continue finessing the wrenches and Torx Bit till your successfully work the stabilizer bar out.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (7:14)
    • Thread the stabilizer link, bushings and washers into the steering knuckle and sway bar.
    • Use your wrenches to secure the link and a socket and ratchet to tighten it up.
  4. step : put the wheel back on (8:29)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Torx Drivers & Sockets

  • T40 Torx Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Ford Crown Victoria Front & Rear Sway Bar Link 4 Piece Set
  • 1998-2002 Lincoln Town Car Front & Rear Sway Bar Link 4 Piece Set
  • 1998-2002 Mercury Grand Marquis Front & Rear Sway Bar Link 4 Piece Set

This part replaces:

  • OE # F8AZ5K484AA
  • Moog K8953
  • Moog K8848
Part #: 1ASFK02598

How-to Video:

(09:06 min)