Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links and frame bushings are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with Stabilizer Bars UNDER 27mm in diameter

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links and bushings. These parts make great replacements and offer good cost savings over the dealer parts.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Frame Bushings
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Raise and secure the vehicle (1:04)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (1:45)
    • Use a wrench to remove the nuts on the top and bottom of the stabilizer link.
    • Use a second wrench to add leverage to the first one you are using.
    • Secure the stabilizer link with the adjustable wrench to secure a Torx bit to remove the nuts the rest of the way with your wrench.
    • Continue finessing the wrenches and Torx Bit till your successfully work the stabilizer bar out.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (7:14)
    • Thread the stabilizer link, bushings and washers into the steering knuckle and sway bar.
    • Use your wrenches to secure the link and a socket and ratchet to tighten it up.
  4. step : put the wheel back on (8:29)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Torx Drivers & Sockets

  • T40 Torx Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria 4 Piece Set Suspension Kit
1998-2002Lincoln Town Car Lincoln Town Car 4 Piece Set Suspension Kit
1998-2002Mercury Grand Marquis Mercury Grand Marquis 4 Piece Set Suspension Kit

This part replaces:

  • OE # F8AZ5K484A
  • OE # YW7Z5493AA
  • OE # F8AC3B438AB
  • Moog K200165
  • Moog K8953
  • OE # F8AZ5K484AA
  • OE # YW7Z 5493 AA
Part #: 1ASFK01910


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:06 min)