These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Suspension/Steering Kit includes:
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (4) - FRONT UPPER Control Arm Bushings - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Tie Rod Adjusting Sleeves - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar Bushing Kit - LH (Driver Side) & RH (Passenger Side)
    • (1) - FRONT Steering Pitman Arm
    • (1) - FRONT Steering Idler Arm
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Inner Tie Rods
  • Kit Includes: (2) Tie Rod Adjusting Sleeves
  • Kit Includes: (2) Front Sway Bar Frame Bushings
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (4) Front Upper Control Arm Bushings
  • Quantity: 20 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (1:16)
    • Loosen the lug nuts with a lug wrench or 19 mm socket and ratchet.
    • Raise and secure the vehicle.
    • Remove the lug nuts and wheel.
  2. step : Remove the cams (1:33)
    • Secure the frame of the vehicle.
    • Jack up the control arm/suspension of the car.
    • Mark your inner and outer cams to help align your vehicle during assembly.
    • Remove the 22 mm bolts and remove the inner and outer cams.
  3. step : Remove the upper ball joint (3:35)
    • Remove the 18 mm nut and remove bolt.
    • Remove the upper ball joint.
  4. step : Install the new upper ball joint. (4:10)
    • Fit the ball joint into the steering knuckle and over the control arm studs.
    • Work the upper ball joint into place.
    • Bolt down with the 18 mm ball joint locking nut.
    • Put your cams down on the control arm studs and thread on the locking nuts.
    • Line up your marks on the cams and tighten down the lock nuts the rest of the way.
    • Tighten up the pinch bolt to 90 ft lbs.
    • Torque the control arm nuts to 118 ft lbs.
    • Insert your grease fitting and fill with the grease gun.
  5. step : put your wheel back on (7:51)
    • Hand tighten your lug nuts
    • Lower the suspension and the vehicle.
    • Torque your lug nuts in a star pattern to 100-110 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket
  • 18mm Socket
  • 21mm Socket
  • 19mm Socket
  • 20mm Socket

  • Specialty Tools

  • Grease Gun

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
A 1 auto is the best
Everything I've ordered has just been great, fast delivery, and the parts fix perfectly, and the price was right.
Thanks A1 auto
May 29, 2018
Purchased
2 months ago
Suspension kit front
So far I am very happy with the parts and price of the parts.
October 29, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Ford Crown Victoria Suspension Kit 20 Piece Set
  • 1998-2002 Lincoln Town Car Suspension Kit 20 Piece Set
  • 1998-2002 Mercury Grand Marquis Suspension Kit 20 Piece Set

This part replaces:

  • OE # F8AZ5K484A
  • OE # F3AZ3A131A
  • OE # 2W7Z3A130A
  • OE # F5AZ3A130A
  • OE # F8AZ3590AA
  • OE # YW7Z5493AA
  • OE # F8AC3B438AB
  • OE # D9AZ3355A
  • OE # E9AZ3355A
  • OE # F5AZ3310A
  • OE # F7AZ3310AA
  • OE # F5AZ3079A
  • OE # F5AZ3078A
  • OE # F4ZZ3050A
  • OE # F5AZ3049A
  • OE # 2W7Z3A131AA
  • OE # F5AC3068BA
  • OE # 2W7Z3050AA
  • OE # F8AZ3050AA
  • OE # F6AZ3049AA
  • OE # F7AZ3049AA
  • Moog K8678
  • Moog K200165
  • Moog ES3311S
  • Moog K8685
  • Moog K8283
  • Moog K8688
  • Moog K8953
  • Moog ES2057RL
  • Moog ES3494
  • Moog K8703
Part #: 1ASFK00856

Out of Stock

How-to Video:

(08:44 min)