Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Raise and secure the vehicle (1:04)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (1:45)
    • Use a wrench to remove the nuts on the top and bottom of the stabilizer link.
    • Use a second wrench to add leverage to the first one you are using.
    • Secure the stabilizer link with the adjustable wrench to secure a Torx bit to remove the nuts the rest of the way with your wrench.
    • Continue finessing the wrenches and Torx Bit till your successfully work the stabilizer bar out.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (7:14)
    • Thread the stabilizer link, bushings and washers into the steering knuckle and sway bar.
    • Use your wrenches to secure the link and a socket and ratchet to tighten it up.
  4. step : put the wheel back on (8:29)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Torx Drivers & Sockets

  • T40 Torx Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2002 Ford Crown Victoria 12 Piece Set Steering & Suspension Kit
  • 1998-2002 Lincoln Town Car 12 Piece Set Steering & Suspension Kit
  • 1998-2002 Mercury Grand Marquis 12 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K8678
  • Moog ES3311S
  • Moog K8685
  • Moog K8953
  • Moog ES2057RL
  • Moog ES3494
  • OE # 2W7Z3A130A, F5AZ3A130A
  • OE # F3AZ3A131A, 2W7Z3A131AA
  • OE # F8AZ5K484AA
Part #: 1ASFK05127



How-to Video:

(09:06 min)