Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   14 Piece Set
  • Kit Includes:
      (2) Tie Rod Adjusting Sleeves
      (2) Front Upper Control Arms with Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Lower Control Arms with Ball Joints
      (2) Front Sway Bar Links
      (1) Idler Arm
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits the LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:49)
    • Pry off the center cap with a flat blade screwdriver
    • Retrieve the center nut key from the glove box
    • Remove the center nut with key
    • Pry off the wheel cover
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel cover bracket
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:28)
    • Apply penetrating oil to the stabilizer link bolts
    • Loosen the 15mm bolt on the top of the stabilizer link
    • Loosen the 18mm bolt on the bottom of the stabilizer link
    • Put a 5mm Allen wrench into the lower stabilizer link bolt
    • Hold the Allen wrench as you remove the lower bolt
    • Remove the 15mm bolt from the top of the stabilizer link
    • Drive the top of the stabilizer link out of the steering knuckle with a hammer and chisel
    • Pull off the stabilizer link
  3. step : Installing the New Stabilizer Link (4:17)
    • Install the grease fittings into the new stabilizer link
    • Push the bottom of the stabilizer link into place
    • Raise the lower control arm with a jack
    • Push the upper stabilizer bar stud into the steering knuckle
    • Thread the 15mm nut onto the top stabilizer bar stud
    • Tighten the 15mm nut to 50 - 55 foot-pounds
    • Thread the 18mm nut onto the lower stabilizer bar stud
    • Tighten the 18mm nut to 65 - 70 foot-pounds
  4. step : Reattaching the Wheel (6:09)
    • Slide the wheel into place
    • Put the wheel cover bracket into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Put the wheel cover on
    • Insert the center nut into the wheel cover with the key
    • Reattach the center cap
    • Return the center nut key to the glove box

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Chisel
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 15mm Socket
  • 21mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 18mm Wrench

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Crown Vic Suspension Parts
The parts I ordered were shipped quickly and arrived on time. Parts seemed to be of good quality (so far). The only thing I really would liked to have had differently in the order would have been to have NEW LOWER CONTROL ARM BOLTS !! Had to cut out old ones and the new ones were almost impossible to find!!! Should know how the parts last after I drive the car a few hundred miles............... Good Job 1A Auto
May 1, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does the ball joints on the control arms come with grease fittings? If so, what size?
Mitchell B April 11, 2017
NO, No grease fittings.
Lawrence S May 1, 2018
Do the parts come with torque specs?
Mitchell B April 17, 2017
Torque specifications will not be included, but if you refer to a repair manual or search through an automotive forum you will be able to obtain these specifications.
Alex P April 17, 2017
Who are the parts manufactured by?
Clyde H August 31, 2017
I dont remember but they are doing the job...
Kendal W August 31, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K August 31, 2017
Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria 14 Piece Set Steering & Suspension Kit
1998-2002Lincoln Town Car Lincoln Town Car 14 Piece Set Steering & Suspension Kit
1998-2002Mercury Grand Marquis Mercury Grand Marquis 14 Piece Set Steering & Suspension Kit
Part #: 1ASFK02421


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:12 min)