Specifications:

  • Brand New Suspension & Steering Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:16)
    • Loosen the lug nuts with a lug wrench or 19 mm socket and ratchet.
    • Raise and secure the vehicle.
    • Remove the lug nuts and wheel.
  2. step : Remove the cams (1:33)
    • Secure the frame of the vehicle.
    • Jack up the control arm/suspension of the car.
    • Mark your inner and outer cams to help align your vehicle during assembly.
    • Remove the 22 mm bolts and remove the inner and outer cams.
  3. step : Remove the upper ball joint (3:35)
    • Remove the 18 mm nut and remove bolt.
    • Remove the upper ball joint.
  4. step : Install the new upper ball joint. (4:10)
    • Fit the ball joint into the steering knuckle and over the control arm studs.
    • Work the upper ball joint into place.
    • Bolt down with the 18 mm ball joint locking nut.
    • Put your cams down on the control arm studs and thread on the locking nuts.
    • Line up your marks on the cams and tighten down the lock nuts the rest of the way.
    • Tighten up the pinch bolt to 90 ft lbs.
    • Torque the control arm nuts to 118 ft lbs.
    • Insert your grease fitting and fill with the grease gun.
  5. step : put your wheel back on (7:51)
    • Hand tighten your lug nuts
    • Lower the suspension and the vehicle.
    • Torque your lug nuts in a star pattern to 100-110 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket
  • 18mm Socket
  • 21mm Socket
  • 19mm Socket
  • 20mm Socket

  • Specialty Tools

  • Grease Gun

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
Everything was there and it all fit as it was supposed to.
October 22, 2017
Purchased
7 months ago
Idler arm
For the most part everything was correct but the spindle on the idler arm is upside-down (smaller side is down and larger side is u). How do I go about switching it?
August 3, 2017
Purchased
10 months ago
Response from 1A Auto
Please contact us at your convenience with a image of the part you received so we may check our stock and send out the appropriate part.
August 4, 2017
Alex P Staff
couldnt ask for better
this kit was an incredible price, and I recieved in within 2 days! everything was correct and fit perfect. above and beyond my expectations! customer for life
July 18, 2017
Purchased
11 months ago
Grand Marquis front end kit
Very satisfied, parts were of good quality and fit as they should. Car goes great down the road, no unusual tire wear after alignment. Thank You 1A Auto, I would recommend you to anyone and will buy again soon
June 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Are all of these fittings greasable such as the one in the video? (At least the applicable fittings)
KingZoo on Nov 13, 2015
BEST ANSWER: Hello and thank you for your inquiry. These will come as sealed units. All of these will come with a lifetime warranty, that covers all manufactures defects. Thank you and have a great day!
Is this kit for the cast or the aluminum control arms?
Ryan F on Sep 13, 2017
BEST ANSWER: I believe it to be cast.
Is this kit Moog? Or is it a different brand?
Josh S on May 14, 2017
BEST ANSWER: This is a set of our 1A Auto brand parts.

Vehicle Fit

  • 1998-2002 Ford Crown Victoria 14 Piece Set Steering & Suspension Kit
  • 1998-2002 Lincoln Town Car 14 Piece Set Steering & Suspension Kit
  • 1998-2002 Mercury Grand Marquis 14 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K8678
  • Moog ES3311S
  • Moog K8685
  • Moog K8283
  • Moog K8688
  • Moog K8953
  • Moog ES2057RL
  • Moog ES3494
  • OE # 2W7Z3A130A, F5AZ3A130A
  • OE # F3AZ3A131A, 2W7Z3A131AA
  • OE # F8AZ3590AA
  • OE # F8AZ5K484AA
Part #: 1ASFK00745


How-to Video:

(08:44 min)