1998-02 Mercury Grand Marquis Tail Light Driver Side - 1ALTL00120

This replacement Tail light is just what you need to get your Mercury Grand Marquis in good looking form again!


  • LH (Driver Side)
  • Replaces dealer part numbers: XW3Z-13405-AA, XW3Z13405AA
  • Direct bolt on
  • Direct replacement
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Center chrome molding included
  • 3 Bulb Light
    • Not correct for models with 4-bulb taillight housings

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Mercury Grand Marquis Tail light makes a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:33)
    • Pull up the panel at the trunk opening.
    • Remove the thumb screw.
    • Pull back the trim.
    • Remove the three 11mm nuts on the back of the taillight.
    • Disconnect the connector.
    • Pull the taillight out and off.
  2. step : Changing a Bulb (1:59)
    • Twist the socket out.
    • Pull the bulb straight out.
    • Push a new bulb in.
    • Twist the socket in.
  3. step : Replacing the Taillight (2:11)
    • Remove the sockets from the old taillight.
    • Twist the sockets into the new taillight assembly.
    • Feed the harness through the car.
    • Line up the taillight and press it into place.
    • Reconnect the connector.
    • Replace the nuts.
    • Replace the trim.
    • Replace the thumb screws.
    • Push the trunk panel back into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:35 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket

This part replaces:

  • Partslink FO2800155
  • Hollander 166-1767L
  • OE # XW3Z 13405 AA
  • TYC 11-5374-01
  • DEPO 331-1966L-US

Vehicle Fit

  • 1998-2002 Mercury Grand Marquis Tail Light 3 Bulb Socket Driver Side
Only 1 left in stock
Part #: 1ALTL00120

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More