1998-02 Honda Accord Window Regulator - 1AWRG00575

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power


  • Fits RH (Passenger Side)
  • Includes motor
  • Replaces dealer part number: 72211S82A01, 72211 S82 A01
  • Built to strict quality control standards
  • Direct bolt on

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:00)
    • Remove the triangle panel.
    • Remove the Phillips screws in the door panel.
    • Pry up the switch panel and unplug all the wiring.
    • Pry off the door latch bezel.
    • Unclip the door panel and remove it.
    • Unplug the courtesy light and unplug the wiring harness.
  2. step : Remove the window regulator. (4:00)
    • Use a 10 mm socket and ratchet to remove the nut and a Phillips screwdriver to remove the two screws securing the bracket.
    • Carefully remove the water shield.
    • Remove the speaker.
    • Use a socket, ratchet and extension to unbolt the window from the regulator.
    • Raise and tape up the window.
    • Disconnect your power window lead.
    • Unbolt the window regulator.
  3. step : Install the new window regulator. (8:45)
    • Thread the regulator into place.
    • Bolt it in using your socket and ratchet.
    • Connect your window lead.
    • Lower the window into place and bolt it to the regulator.
    • Replace the speaker and water shield.
    • Bolt the bracket back on.
    • Plug in all the wiring harnesses and clip on the door panel.
    • Screw back in your Phillips screws and plug in the switch panel.
    • Replace the corner panel and door latch bezel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2000 Honda Accord Window Regulator
My regulator from 1aauto worked perfectly. The video showing the installation was very helpful. It took me about 2 hours with coffee breaks.
January 29, 2017
Good product, Excellent Customer Service!
I needed a driver side window regulator, but accidently ordered a passenger side regulator. When I discovered the mistake I immediately called Customer Service. The wait was not too long and the automated system kept me updated on where my call was in the queue. I spoke with Amanda S. She was extremely courteous, helpful, and efficient. Amanda placed a new order for the correct regulator and provided a return authorization and instructions for the incorrect one. She answered all my questions and stayed on the line until I checked the follow-up e-mail she sent me to verify the information provided. The new regulator came quickly and has been installed. The product appears to be of good quality, installed fairly easily, and works well. 1A Auto gets my recommendation!
January 30, 2017
works great video saved A LOT of time
I mixed my 10mm bolts from the motor up with the 10mm bolts from the 2-bolt bracket. The bracket bolts are a little shorter, so the longer motor bolts stopped the window from going down more than 1/3 of the way. Once i put the shorter bolts in the 2-bolt bracket, it worked fine.
July 14, 2017
Installed very easily. No poor fitment issues, very satisfied!
November 26, 2017
Fast delivering works as advertised
Great aftermarket product, great price fast delivery and packaged well.
September 12, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this include the bolts needed?
Bobby T September 16, 2018
No, you have to use the bolts that mount the existing regulator to the door
Paul D September 17, 2018
Need to use your old hardware for assembly on door
Thomas W September 17, 2018
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition. We do not sell new hardware separately at this time.
Jessica D September 17, 2018
I believe the bolts needed are already on the car and are reused. Everything you need is included in the part noted. Should take 30 minutes or less to replace.
R B September 18, 2018
Unfortunately the previous owner of the car lost the bolts and door trim somehow.
Bobby T September 18, 2018
Year Make Model Description
1998-2002Honda Accord Honda Accord 2 Door Power Window Regulator with Motor Passenger Side
Part #: 1AWRG00575

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:07 min)