1ASFK01910-1998-02 Ford Lincoln Mercury Suspension Kit 4 Piece Set

Replaces

2000 Ford Crown Victoria Suspension Kit 4 Piece Set

1ASFK01910-838972-2000
Guaranteed to fit: 2000 Ford Crown Victoria

Part Details

  • Kit Includes: (2) Front Sway Bar Frame Bushings
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 4 Piece Set

This part replaces:

  • Moog K200165
  • Moog K8953
  • OE # F8AZ5K484A
  • OE # F8AZ5K484AA
  • OE # YW7Z5493AA
  • OE # YW7Z 5493 AA
  • OE # F8AC3B438AB
FREE SAME DAY SHIPPING
Save 17%
List: $47.95 Save: $8.00
Part 1ASFK01910
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA56191

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Front Sway Bar Frame Bushings
      (2) Front Sway Bar Links

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links and frame bushings are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Comes as a SET of 4
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with Stabilizer Bars UNDER 27mm in diameter

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links and bushings. These parts make great replacements and offer good cost savings over the dealer parts.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Raise and secure the vehicle (1:04)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (1:45)
    • Use a wrench to remove the nuts on the top and bottom of the stabilizer link.
    • Use a second wrench to add leverage to the first one you are using.
    • Secure the stabilizer link with the adjustable wrench to secure a Torx bit to remove the nuts the rest of the way with your wrench.
    • Continue finessing the wrenches and Torx Bit till your successfully work the stabilizer bar out.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (7:14)
    • Thread the stabilizer link, bushings and washers into the steering knuckle and sway bar.
    • Use your wrenches to secure the link and a socket and ratchet to tighten it up.
  4. step : put the wheel back on (8:29)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Star Drivers & Sockets

  • T40 Bit

  • Wrenches - SAE

  • Complete SAE Wrench Set

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria Suspension Kit 4 Piece Set
1998-2002Lincoln Town Car Lincoln Town Car Suspension Kit 4 Piece Set
1998-2002Mercury Grand Marquis Mercury Grand Marquis Suspension Kit 4 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS06666
DIY Solutions SUS06228
Ford F8AZ5K484AA
Ford F8AC3B438AB
Ford YW7Z5493AA
MOOG K8953
MOOG K200165
MOOG Chassis Products K8953
MOOG Chassis Products K200165

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA56191
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Parts
They are excellent and fit as they should. Took care of my problem. I’d recommend them for others
September 25, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

1998-02 Ford Lincoln Mercury Suspension Kit 4 Piece Set TRQ PSA56191-1ASFK01910 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Ford Crown Victoria with these options.