1ASFK05127-1998-02 Ford Lincoln Mercury Steering & Suspension Kit 12 Piece Set

Replaces

2000 Ford Crown Victoria Steering & Suspension Kit 12 Piece Set

1ASFK05127-1124571-2000
Guaranteed to fit: 2000 Ford Crown Victoria

Part Details

  • Kit Includes: (2) Tie Rod Adjusting Sleeves
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Moog K8678
  • Moog ES3311S
  • Moog K8685
  • Moog K8953
  • Moog ES2057RL
  • Moog ES3494
  • OE # 2W7Z3A131AA
  • OE # F3AZ3A131A
  • OE # 2W7Z3A130A
  • OE # F5AZ3A130A
  • OE # F8AZ5K484AA
  • TRQ PSA60024
FREE SAME DAY SHIPPING
Save 27%
List: $123.95 Save: $34.00
Part 1ASFK05127
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA60024

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   12 Piece Set
  • Kit Includes:
      (2) Tie Rod Adjusting Sleeves
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Upper Ball Joints
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:54)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:11)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Remove the cotter pin from the tie rod nut using pliers
    • Remove the 19mm bolt from the tie rod end
    • Loosen the 1/2 inch nut and bolt from the tie rod adjusting sleeve
    • Attach the tie rod press tool to the steering knuckle
    • Use the tie rod press tool and a wrench to separate the tie rod end from the steering knuckle
    • Apply penetrating oil to the tie rod adjusting sleeve
    • Measure the distance from the end of the adjusting sleeve to the end of the tie rod
    • Note this measurement
    • Loosen the tie rod from the adjusting sleeve with an adjustable wrench
    • Pull out the tie rod
  3. step : Installing the New Outer Tie Rod (4:08)
    • Thread the new tie rod into the adjusting sleeve
    • Measure the distance from the end of the adjusting sleeve to the end of the tie rod
    • This measurement should match the one noted in Step 2
    • Insert the tie rod into the steering knuckle
    • Start the 19mm nut onto the tie rod
    • Tighten the 19mm nut to between 40 - 45 foot-pounds of torque
    • Turn the nut further to line up the space for the cotter pin
    • Put the cotter pin into place
    • Bend the cotter pin with pliers
    • Tighten the 1/2 inch nut and bolt to 20 - 21 foot-pounds
  4. step : Reattaching the Wheel (5:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Have the vehicle professionally aligned

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket

  • Sockets - SAE

  • 1/2 Inch Socket

  • Specialty Tools

  • Tie Rod Puller

  • Wrenches - SAE

  • 1/2 Inch Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria Steering & Suspension Kit 12 Piece Set
1998-2002Lincoln Town Car Lincoln Town Car Steering & Suspension Kit 12 Piece Set
1998-2002Mercury Grand Marquis Mercury Grand Marquis Steering & Suspension Kit 12 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS03733
DIY Solutions SUS00092
DIY Solutions SUS00106
DIY Solutions SUS06687
DIY Solutions SUS07341
DIY Solutions SUS06666
DIY Solutions SUS07389
Ford F8AZ5K484AA
Ford F8AC3B438AB
MOOG ES3311S
MOOG K8685
MOOG ES3495
MOOG K8953
MOOG K8678
MOOG ES3494
MOOG Chassis Products K8678
MOOG Chassis Products K8953
MOOG Chassis Products ES3311S
MOOG Chassis Products ES3494
MOOG Chassis Products ES3495
MOOG Chassis Products K8685

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA60024
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
GREAT KIT!!!
My 1999 mercury grand marquis (21 years old) just had a lower ball joint failure and a sway bar to. They were the original sealed factory built parts. I certainly learned a lesson in car care and that is to check up on those parts. So I needed new ones. After watching 1a auto videos I realized I can do the jobs myself. I learned about greaseable ones and non greaseable. The OEM ones were none greaseable and lasted 20 years so I chose this kit. I went and did the whole front end including new shocks from 1a auto. WOW I COULDNT BE HAPPIER! AFTER A ALIGNMENT IT RODE AND STEERED LIKE IT WAS A BRAND NEW CAR! if you need a new front end kit this one wont disappoint. The price is so low you might be scared its a cheap crappy part but it really isnt. Its quality and will last for surethis product and what you like or dislike about it.
April 17, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company. See all trademarks.

1998-02 Ford Lincoln Mercury Steering & Suspension Kit 12 Piece Set TRQ-1ASFK05127 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2000 Ford Crown Victoria with these options.