Replaces

1998-02 Chevy Prizm Toyota Corolla Exterior Door Handle - 1ADHE00170

This replacement exterior door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side) FRONT
  • Injected molded plastic with black textured finish
  • Durable construction
  • Steel center rod and return spring
  • Direct replacement for original handle

This exterior door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Part Details

  • Color: Black
  • Finish: Textured

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Inside Door Panel (1:01)
    • Remove the Phillips screw from the inside door handle.
    • Slide the handle forward and pull it out.
    • Disconnect the clip on the back from the rod using a flat blade screwdriver.
    • Pry up the switch panel and pull it forward.
    • Disconnect the window switch lead.
    • Pry up the armrest pad
    • Remove the screws from underneath the pad.
    • Turn the Phillips head until it pops out.
    • Remove the panel by the mirror.
    • Remove the side panel.
    • Remove the water shield.
  2. step : Removing the Exterior Handle (3:24)
    • From the inside of the door, remove the upper yellow clip attached to the handle.
    • Use a flat blade screw driver through the smaller hole and push the rod out of the handle.
    • Remove the lower yellow clip. And pull the rod out.
    • Remove the upper 10 mm bolt from the inside of the handle. Then the one below it.
    • From the outside lift the door handle up and pull it free.
  3. step : Installing the New Handle. (6:12)
    • Remove the locking mechanism from the old handle and attach it to the new handle.
    • While inserting the handle into the door reconnect the lower rod and clip.
    • Replace the 10 mm bolts.
    • Reattach the upper rod and clip and flip the clip down.
    • Line up and reinstall the door panel.
    • Reinsert all of the screws and panels.
    • Insert the Phillips head clip.

Tools needed for replacement:

    General Tools

  • Flashlight

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
pleased customer
excellent instructional video as well as follow-up expediting of order; thanks for the professionalism Richard and Dale Lenat
February 7, 2018
Purchased
6 months ago
Perfect fit
Got the part quickly had it installed and so far so good. The process was easy to navigate and in the future I will come to 1A Auto for parts when I need them.
October 31, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1998-2002Chevy Prizm Chevy Prizm Front Textured Black Exterior Door Handle Driver Side
1998-2002Toyota Corolla Toyota Corolla Front Textured Black Exterior Door Handle Driver Side

This part replaces:

  • OE # 94857481
Part #: 1ADHE00170


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:12 min)