Replaces

1998-02 Chevy Camaro Pontiac Firebird Brake Kit Nakamoto CD749, 55034-DSZ - 1APBS00001

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • 11.92" Diameter
  • Vented

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Removing the Brake Caliper (1:12)
    • Pry center cap or hubcap to access and remove the lug nuts.
    • Jack up the car and remove the wheel.
    • Place a screw driver or pry bar into the hole on the caliper and pry out so that the piston drops into the caliper.
    • Undo the two 15 mm bolts on the back of the caliper.
    • Pull caliper off, using a screw driver to pry it off if necessary.
    • Secure caliper bracket safely to avoid stressing the brake line.
  2. step : Step 2: Removing the Caliper Bracket and rotor (3:08)
    • Pry brake pads out of the caliper bracket.
    • Remove the two 15 mm bolts on the back side of the caliper bracket (use pipe with the ratchet for more leverage).
    • Remove bracket and rotor.
  3. step : Step 3: Reinstallation of Brake Caliper (4:17)
    • Replace rotor and secure with a lug nut.
    • Replace the caliper bracket and tighten bolts to 90ft/lbs.
    • Remove caliper bracket slides and clean with a wire brush.
    • Slide brake pads into place.
    • Pull caliper down and use a c-clamp to push the piston all the way into the caliper.
    • Place the caliper back on to the bracket.
    • Clean caliper bolts and add small amount of oil.
    • Replace caliper bolts. Torque them to 50ft/lbs.
    • Remove lug nut and replace wheel.
    • Tighten lug nuts in a star pattern and replace cap.
    • Before driving, pump brakes until pedal goes solid.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great Product
I ordered this product for the pricing and looks, they arrived very quickly and the tracking info was easy to follow. Once they arrived I installed them rather easy then took it out to see what they felt like. 1 they are way quieter, 2 they make the car look nicer, and 3 they perform very well! Would recommend to everyone
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:13 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto CD749, 55034-DSZ

Vehicle Fit

  • 1998-2002 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic Performance Nakamoto
  • 1998-2002 Pontiac Firebird Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic Performance Nakamoto
Part #: 1APBS00001

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD749, 55034-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More