Replaces

1998-02 Brake Rotor Front Pair Nakamoto 54060 - 1ABFS00708

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front Brake Rotor Specifications:
      12.44" (316mm)
      Vented
      5 Lug
  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications:

  • Comes as a Pair
  • Includes LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Fits 5 Stud Wheels
  • 12.42" (316mm) Diameter
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:06])
    • Pry off the center cap with a flat blade screwdriver
    • Retrieve the center safety bolt key from the glove box
    • Remove the center safety bolt with the key
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:44)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:41)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:55)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:14)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Make sure the caliper bracket slides move smoothly
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (6:51)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket with the notches on the upper side
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to between 15 - 16 foot-pounds
  7. step : Reattaching the Wheel (8:59)
    • Turn the wheels straight
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Put on the wheel cover bracket
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Put the center safety bolt in with the key
    • Push on the center cap
  8. step : Testing the Brakes (9:44)
    • Return the center safety bolt key to the glove box
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 13mm Socket
  • 21mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Just love 1 auto free and fast delivery and of course the quality producfs
I never had a problem with anything I purchased so i highly recommend 1a auto to all my friends.The front brake rotors were just what i asked for -- as usual.
April 2, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2002Ford Crown Victoria Ford Crown Victoria Front Brake Rotor Pair Nakamoto
1998-2002Lincoln Town Car Lincoln Town Car Front Brake Rotor Pair Nakamoto
1998-2002Mercury Grand Marquis Mercury Grand Marquis Front Brake Rotor Pair Nakamoto
Part #: 1ABFS00708


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 54060

How-to Video:

(10:28 min)