Specifications:

  • Professional Grade Ceramic Disc Brake Pads
  • 4 Piece Front Brake Pad Set
  • Includes shims
  • Direct replacement

Specifications:

  • Brand New Disc Brake Rotors
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Fits 5 stud wheels
  • 12.42" (316mm) diameter

Specifications:

  • Brand New Wheel Bearing Kit
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Wheel studs already installed
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:06])
    • Pry off the center cap with a flat blade screwdriver
    • Retrieve the center safety bolt key from the glove box
    • Remove the center safety bolt with the key
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:44)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:41)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:55)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (5:14)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Make sure the caliper bracket slides move smoothly
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (6:51)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket with the notches on the upper side
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to between 15 - 16 foot-pounds
  7. step : Reattaching the Wheel (8:59)
    • Turn the wheels straight
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Put on the wheel cover bracket
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Put the center safety bolt in with the key
    • Push on the center cap
  8. step : Testing the Brakes (9:44)
    • Return the center safety bolt key to the glove box
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 13mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
my 2000 crown vic ,with police package has dual piston calipers.My question regards the front brake pads fitting my calipers? are all 2000 merc,ford , lincoln dual piston calipers standard equipment?
Gary N on Jun 10, 2016
BEST ANSWER: I do not believe so
do you have front brake pads for dual piston calipers? included in this package?
Gary N on Jun 10, 2016
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

How-to Video:

(10:28 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 13mm Socket
  • 21mm Socket



This part replaces:

  • Reference Number CD748
  • Hollander 530-01985
  • Hollander 538-01434B
  • OE # F7AZ 1104 AC

Vehicle Fit

  • 1998-2002 Ford Crown Victoria Front Brake & Wheel Bearing Kit
  • 1998-2002 Lincoln Town Car Front Brake & Wheel Bearing Kit
  • 1998-2002 Mercury Grand Marquis Front Brake & Wheel Bearing Kit
Part #: 1ABMS00057

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More