Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) REAR
  • Does NOT include the power window motor
  • Replaces dealer part numbers: 82721-9E010, 827219E010
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Installation:

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: without Motor

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:01)
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Pry off the door handle bezel with a flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove the 10mm screws from the metal bracket
    • Carefully peel off the water shield
  2. step : Removing the Regulator (2:43)
    • Remove the four 10mm bolts from the brace
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Disconnect the window motor lead
    • Remove the three 10mm bolts from the regulator motor
    • Remove the two 10mm bolts from the regulator
    • Loosen the third 10mm bolt from the regulator
    • Pull the window regulator out through the door
  3. step : Installing the New Motor (4:48)
    • Remove the screws from the old motor with an impact driver or screwdriver and hammer
    • Insert the new motor to the regulator
    • Tighten the screws to the new motor
  4. step : Reinstalling the Regulator (5:27)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the 10mm bolts into the regulator
    • Insert the three 10mm bolts into the regulator motor
    • Connect the window motor lead
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Tighten the four 10mm bolts from the brace
  5. step : Reinstalling the Door Panel (7:19)
    • Put the water shield into place
    • Insert the 10mm screws from the metal bracket
    • Lift the door panel into place
    • Push in the door panel clips
    • Push on the door handle bezel
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw into the door pull
    • Push on the trim piece inside the door handle
    • Push on the trim piece inside the door pull

Tools needed for replacement:

    General Tools

  • Hammer
  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2001Nissan Altima Nissan Altima Rear Power Window Regulator without Motor Driver Side
Part #: 1AWRG01490


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:21 min)