Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Power operation
  • Replaces dealer part number: 80721-9E010, 807219E010
  • Does NOT include the power window motor
  • Direct replacement
  • Built to strict quality control standards

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:42)
    • Pry off the trim piece at the front top corner of the door panel with a flat blade screwdriver
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw inside the door pull
    • Pry off the door handle bezel with a flat blade screwdriver
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove the two 10mm screws from the door handle speaker
    • Remove the Phillips head screw from the door handle
    • Remove the two Phillips screws from the bracket on the door
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (2:27)
    • Remove the four 10mm bolts from the brace
    • Remove the brace
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand and remove it
    • Remove the four 10mm bolts from the regulator
    • Remove the three 10mm bolts from the regulator motor
    • Disconnect the window motor lead
    • Pull the window regulator out through the door
  3. step : Removing the Window Regulator Motor (4:36)
    • Remove the three Phillips screws from the window motor
    • Press in the clip to the motor bracket
    • Remove the motor from the motor bracket
  4. step : Installing the Window Regulator Motor (5:03)
    • Mount the new motor to the window regulator
    • Insert the three Phillips screws to the window motor
    • Reinstall the clip to the motor bracket
  5. step : Reinstalling the Regulator (5:30)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the three 10mm bolts into the regulator motor
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the wiring harness to the window switch
    • Test the window
    • Disconnect the window switch
    • Insert the four 10mm nuts to the bracket
  6. step : Reinstalling the Door Panel (7:54)
    • Put the water shield into place
    • Insert the two 10mm nuts to the bracket on the door
    • Insert the two 10mm screws to the door handle speaker
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the window switch wiring harnesses
    • Push in the switch panel
    • Insert the pull handle trim piece in place
    • Tighten the Phillips screw to the pull handle
    • Push in the pull handle trim button
    • Push on the top corner triangular trim piece
    • Push on the door handle bezel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2001Nissan Altima Nissan Altima Front Power Window Regulator without Motor Driver Side
Only 5 left in stock
Part #: 1AWRG00196


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:09 min)