• Fits (RH Passenger Side) Front Door
  • Assembly includes motor and regulator
  • 100% tested prior to leaving the factory

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!


  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.


  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.


  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:42)
    • Pry off the mirror base panel with a flat blade screwdriver
    • Pry off the switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the trim piece inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw from the door pull
    • Pull out the door pull cover by hand
    • Pry off the door handle bezel with a flat blade screwdriver
    • Pull the door panel off by hand
    • Lift the door panel up and off
    • Remove the two Phillips head screws from the door speaker
    • Remove the Phillips head screw from the door handle
    • Remove the two Phillips screws from the door bracket
    • Peel back the water shield carefully
  2. step : Removing the Window Regulator (2:26)
    • Remove the four 10mm bolts from the door brace
    • Remove the brace
    • Lower the window by hand
    • Remove the two 10mm bolts from the window track
    • Raise the window by hand
    • Tilt the window and pull it out of the door
    • Disconnect the window motor lead
    • Pull the motor wiring harness away from the door
    • Remove one of the 10mm bolts from the top of the regulator
    • Loosen the other 10mm bolt from the top of the regulator
    • Remove the two 10mm bolts from the bottom of the regulator
    • Remove the three 10mm bolts from the window motor
    • Feed the motor wiring harness through the door
    • Pull the regulator and motor out through the door
  3. step : Installing the New Window Regulator (4:36)
    • Remove the 10mm bolt from the old regulator
    • Insert the 10mm bolt into the new regulator
    • Slide the new regulator into the door
    • Hang the regulator by its top bolt
    • Line up the window motor
    • Pull the motor wiring harness through the door
    • Connect the motor wiring harness
    • Start the three 10mm bolts for the motor
    • Start the second upper regulator bolt
    • Start the two lower regulator bolts
    • Tighten all the bolts
    • Tilt the window into the door
    • Lower the window by hand until it contacts the regulator
    • Insert the two 10mm bolts into the window clamps
    • Connect the window switch to its wiring harness
    • Turn on the vehicle
    • Test the window with the switch
    • Turn off the vehicle
    • Disconnect the window switch from the wiring harness
    • Put the door brace in place
    • Insert the four 10mm bolts into the door brace
  4. step : Reinstalling the Door Panel (7:00)
    • Put the water shield into place
    • Insert the two screws into the speaker
    • Put the bracket in place
    • Insert the two bolts into the bracket
    • Pull the window switch wiring harness through the door panel cavity
    • Put the door panel into place
    • Push in the door panel clips
    • Push on the mirror base panel
    • Connect the window switch wiring harness
    • Push the window switch into the door panel
    • Push the door pull cover into the door panel
    • Insert the Phillips screw into the door pull
    • Push on the door handle bezel
    • Insert the Phillips screw into the door handle

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Window regulator.
Item easy to install, correct fit, works as it should.
June 24, 2018
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2001 Nissan Altima Front Power Window Regulator with Motor Passenger Side

This part replaces:

  • Hollander 125-58694R
  • OE # 80720-9E010
  • Partslink NI1351112
  • Dorman 741-739
  • TYC 660069
Part #: 1AWRG00478

How-to Video:

(09:17 min)