Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits the FRONT BLOWER MOTOR
  • New, not remanufactured or rebuilt
  • Direct replacement
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

 

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Testing the Blower Motor Resistor (1:14)
    • Turn the ignition on
    • Test the fan in all its positions
    • The fan speed should change with each turn of the knob
    • Turn the ignition off
  2. step : Removing the Radiator Bottle (2:19)
    • Apply penetrating oil to the two 11mm nuts in the radiator bottle
    • Remove the two 11mm nuts from the radiator bottle
    • Remove the two 10mm nuts from the radiator bottle
    • Pull the radiator bottle aside
  3. step : Removing the Blower Motor Resistor (3:04)
    • Disconnect the fan motor wiring harness
    • Pull the vent tube collar off of the fan motor
    • Pull the vent tube off of the fan motor
    • Carefully remove the two 8mm bolts from the blower motor resistor, being sure not to drop them
    • Pull out the blower motor resistor
    • Disconnect the resistor wiring harness
    • If the harness does not disconnect, break up the resistor housing with pliers and a screwdriver
  4. step : Installing the New Blower Motor Resistor (5:59)
    • Apply penetrating oil to the blower motor resistor wiring harness
    • Connect the new blower motor resistor to its wiring harness
    • Put the new blower motor resistor into place
    • Insert the two 8mm bolts into the resistor
    • Stretch the vent tube collar around the fan motor
    • Push the vent tube onto the fan
    • Reconnect the fan motor wiring harness
  5. step : Testing the Blower Motor Resistor (8:07)
    • Turn the ignition on
    • Test the fan in all its positions
    • The fan speed should change with each turn of the knob
    • Turn the ignition off
  6. step : Reinstalling the Radiator Bottle (8:21)
    • Put the radiator bottle into place
    • Insert the two 10mm bolts into the radiator bottle
    • Fasten the two 11mm nuts onto the radiator bottle

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers
  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket
  • 11mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2001Ford Explorer Ford Explorer Blower Motor Resistor
1998-2001Mercury Mountaineer Mercury Mountaineer Blower Motor Resistor
Part #: 1AHBR00076


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:02 min)