Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Right Hand (Passenger Side)
  • Plastic Lens
  • Includes lens, housing, and mounting panel
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Handling the Bulbs (0:53)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulbs (0:54)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly
    • Disconnect the harness
    • Remove the rubber boot.
    • Unclip the wire harness.
    • Remove the bulb.
    • Reverse process for installation.
  3. step : Remove parkinglight assembly (2:01)
    • Remove the Phillips screw at the top of the parkinglight assembly
    • Pull the parkinglight assembly out.
    • Disconnect the harness and bulbs.
  4. step : Remove the headlight assembly (2:49)
    • Disconnect the wiring harness
    • Remove the two 10 mm bolts and the one 10 mm nut
    • Pull out the headlight assembly.
  5. step : Install the new headlight assembly. (4:15)
    • Adjust the adjustor screws to match the old headlight assembly for a preliminary beam adjustment.
    • Plug in the wiring harness.
    • Bolt the headlight assembly in.
  6. step : Install the parking light assembly (6:10)
    • Plug in the bulb and harness.
    • Place the parking light assembly into its seating and bolt in with your Phillips screw and driver.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2000Toyota Sienna Toyota Sienna Headlight Passenger Side
Only 5 left in stock
Part #: 1ALHL00603


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:48 min)