Specifications:
  • Brand New Headlight
  • Fits LH (Driver Side)
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace the bulb (0:55)
    • Reach into the engine bay behind the headlight assembly and unplug the harness.
    • Twist clockwise and pull to remove the bulb.
    • Plug in the new bulb and twist and push it back in.
    • Remove the battery to do the same on the other side.
  3. step : Remove the headlight assembly (2:00)
    • Remove the 8 mm and 10 mm bolts securing the bumper cover.
    • Use a flat blade screwdriver to remove the push clips on the bumper cover.
    • Set the bumper cover aside.
    • Remove the four 10 mm bolts securing the headlight assembly and bracket.
    • Unplug the harness and bulbs from the headlight assembly and set aside.
  4. step : Install headlight assembly (5:30)
    • Plug the bulbs and harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm and 8mm sockets and ratchet and bolt the assembly and mounting back in.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
0
0
1
Foggy and Moisture
the headlights are okay, but you get what you pay for, right side is ok, some moisture that dries out quick and the left side full of water and moisture really foggy, invest a little on better quality,
December 16, 2016
Response from 1A Auto
Our headlights on occasion will come with test bulbs, and upon receipt and attempted installation we suggest changing them out with new or existing bulbs from your factory assembly. The reason for this is the test bulbs in some cases do not seal properly and could cause the condensation. If this is something you have performed, the lamp is backed by a lifetime warranty and if you contact one of our customer service representatives we may provide a warranty replacement for the side obtaining too much water.
December 20, 2016
Alex PStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998-2000 Honda Accord Headlight Driver Side

This part replaces:

  • OE # 33151S84A01
  • Partslink HO2502111
  • Hollander 114-58539L
  • TYC 20-5120-01-1
  • DEPO 317-1114L-US
Part #: 1ALHL00586



How-to Video:

(11:12 min)