Replaces

1998-00 Honda Accord Headlight Pair - 1ALHP00097

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:
  • Brand New Headlights
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Handling the Bulbs (0:52)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace the bulb (0:55)
    • Reach into the engine bay behind the headlight assembly and unplug the harness.
    • Twist clockwise and pull to remove the bulb.
    • Plug in the new bulb and twist and push it back in.
    • Remove the battery to do the same on the other side.
  3. step : Remove the headlight assembly (2:00)
    • Remove the 8 mm and 10 mm bolts securing the bumper cover.
    • Use a flat blade screwdriver to remove the push clips on the bumper cover.
    • Set the bumper cover aside.
    • Remove the four 10 mm bolts securing the headlight assembly and bracket.
    • Unplug the harness and bulbs from the headlight assembly and set aside.
  4. step : Install headlight assembly (5:30)
    • Plug the bulbs and harness into the new headlight assembly
    • Clip the headlight into place.
    • Use your 10mm and 8mm sockets and ratchet and bolt the assembly and mounting back in.
    • Clip the bumper cover back on and use your 10 mm socket and ratchet to bolt the bolt by the far headlight back into place.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
They Look Fantastic!
Amazing! One fourth the cost of OEM and they look fantastic. I bought a pack of plastic body fasteners for 2000 Hondas and Im glad I did. Most of them got pretty mangled taking them out to remove the fender.
October 9, 2017
1999 Honda Accord headlights
The headlights fit perfectly and look great. It will make your car look new again. The job was simple thanks to your 1A Auto video. You guys are amazing. Keep up the good work. Thank you for all you do.
December 29, 2017
Headlights
The new headlights were awsome and really made a great difference in the lighting. The installation went well with the help of my daughter-it is her car-. It is unbelievable that you can provide such high quality parts for so reasonable prices. I am a Mercedes and Ferrari owner and my prices for parts can trigger a heart attack! Thank you again for being there for us. Dr Joseph Berube
June 8, 2019
Headlights
Had no problem installing my new headlights. Perfect fit, also like the clarity of the glass, only had to make minor adjustments to light aim. Very happy with the results.
June 10, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How much time is invoked for a do it yourself?
Shawn F May 21, 2018
Install times will vary greatly depending on the vehicle and tools required. We have an install video that may help you estimate the time it may take you to install these parts. I have provided a link below or you can view it right in our listing. Thanks!! https://www.youtube.com/watch?v=zAO1bl8T4u4
Adam G May 21, 2018
I did not do it myself as Im too old for that, but my garage took an hour. I always figured Id take twice or 3 times as long. Hope that helps.
Warren L May 21, 2018
I had both of mine replaced, adjusted, and the bumper cover put back in place in about 1.5 hours in my driveway. Just make sure you have everything you need ahead of time.....including a few extra plastic push pins for the bumper cover. You will find some missing or will probably break a couple taking things apart. It’s not too difficult.....there is a couple of videos out there that take you through everything.
Mike M May 21, 2018
It took me about 2 hours. One screw was stripped out so took bit had break plastic nut on back side. Few of the plastic pop out grommets broke also. Obviously been in awhile plastic got brittle. Wasted time running to O’reilies auto parts look for parts they did not have right one went to Honda dealer they had plastic plugs and plastic nut little different nut design but worked fine on hand. Lights themselves easy to install. Toughest was getting bumper off with stripped nut and plastic pop outs breaking heads having use pliers to pull out. Would recommend buying new push in plugs. Made the bumper replacement much quicker clean new working push plugs.
Shane V May 21, 2018
Are these headlights adjustable once installed? Up down - left right?
Paul Y December 24, 2018
Hello, These lights will have the same adjustments on them required to aim the lights once they are installed. Thanks!
Adam G December 24, 2018
Yes - they have the same adjustment/aiming ability as the factory OEM headlights. They even have the same type of adjustment mechanism/ gear looking thingy. You will just need to use a large Phillips screwdriver....a number 2 might work, but a number 3 is better. You use the Phillips end to sort of mesh with the adjustment gear sort of like a ring and pinion gear to turn the adjustment gear. The size of the screwdriver needs to match the size of the teeth on the adjustment gear.......so a number 3 Phillips works well.
Mike M December 24, 2018
yes they are. best aftermarket products direct replacement no need to fiddle or adjustments like other aftermarket parts. very happy with A1 Auto products and their customer service
N N December 24, 2018
Up and down only.
John W December 25, 2018
Year Make Model Description
1998-2000Honda Accord Honda Accord Headlight Pair
Part 1ALHP00097
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.