Replaces

1998-00 Fuel Pump & Sending Unit Module TRQ FPA84939 - 1AFPU00293

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement electric fuel pump module assembly is just what you need to get your vehicle in good working order again!

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Replaces dealer part number: 19177240, 25314319
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Fuel sending unit
    • Float
    • Strainer
  • Number of outlets: 3
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
  • Correct for models with RPO code 8J9

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

This electric fuel pump module assembly with sending unit is a great replacement and has good cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

This fuel pump includes a new electrical connector harness. You will need to remove your existing electrical connector and install the new connector provided in order to install your new fuel pump (instructions are included with the pump).

This fuel pump is not a universal fit item. Because your vehicle’s original connector is prone to failure due to corrosion, cracking, loose pin housings, and wire crimp issues, the OE manufacturer has changed the shape of the connector, requiring the install of a new electrical connector during fuel pump service.

Rigorously Tested

Meets or exceeds all SAE fuel pump performance and durability standards

Highest Quality Material

Consistent high quality plastic molding media.

High-carbon motor commutator and brushes for longer pump life

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Depressurize fuel system (1:30)
    • With the car running, open the hood and access the fuse center.
    • Pull out the fuel pump relay which is #18 in this car.
    • After awhile your car will stop running because it runs out of fuel.
  2. step : Disconnect battery (2:20)
    • Use an 8mm wrench to disconnect the negative battery cable
  3. step : Disconnect and remove fuel tank (2:30)
    • Spray the bolts on the straps holding the fuel tank with penetrating oil.
    • Loosen up the clamp at the top of the fuel neck.
    • Grab onto that hose and twist it free and pull it off.
    • Unplug the connectors by pulling out the safety tabs.
    • Unclip the green clip behind the fuel tank by prying the tab and pinching to disconnect the line.
    • Make sure you have a catch pan ready because this will leak fuel.
    • Repeat on the upper line with the blue tab.
    • Use a screwdriver to help if it’s difficult to reach.
    • Disconnect the rest of the hoses.
    • Loosen the heat shield between the exhaust and the tank.
    • Support the tank and remove the straps.
  4. step : Remove assembly (8:03)
    • Use your needle nose pliers to disconnect the locking tab at the top of the connector.
    • Unplug the wiring from the fuel pump assembly.
    • Use a chisel and hammer to remove the locking ring.
    • Pull the fuel pump assembly up and out.
    • Remove the old O ring
  5. step : Install new fuel pump (10:06)
    • Put in the new O ring
    • Place the new assembly in and lock the locking ring in place by turning it clockwise into the brackets.
    • Secure with hammer and chisel.
    • Plug in the new lead and use wire taps to connect the wiring with the old square ended lead.
    • New large black lead connects to the old black lead.
    • New thin black lead connects to old black and white lead.
    • Purple and purple leads connect as do the grey ones.
  6. step : Reinstall the fuel tank (13:49)
    • Jack the tank back up.
    • Bolt the straps back in, tightening the bolts with a hand wrench.
    • Reconnect all the harnesses.
    • Reconnect the big tube.
    • Reconnect all the fuel lines, remembering to remove the little green line protectors.
    • Secure the heat shield.
    • Reconnect the fuel neck.
  7. step : Finish up (15:40)
    • Put the fuel pump relay back in.
    • Reconnect the battery.
    • Cycle the key a couple times to make sure the fuel gauge is working.
    • Start the car and check underneath for any fuel leaks.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Chisel
  • Drain Pan

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 13mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 8mm Wrench

4.60/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
1
0
0
This is the first fill since I replaced the unit. The gauge seems to be correct so far. It wasnt a plug and play as was hoping it to be. The wiring had to be cut and the replacement connection installed . This also was a task, because the color coding didnt match. But so far it seems to be working properly. Ordering and delivery was pretty simple.
April 1, 2017
Great Price
Fast shipping and excellent price.Called it in on Thursday and had it by Saturday now thats fast shipping.Thank you
May 3, 2017
great deal
I purchased a fuel pump for my chevy truck at a great price perfect fit , so far so good , would buy from 1aauto again,thank you for a good product and great price
July 4, 2017
I received the fuel pump promptly. The cost was an amazing deal, I would highly recommend 1a auto. Product was great plug and play, came with all necessary parts for electrical plug and o ring for installation of the pump. thanks a lot 1a auto!
August 18, 2017
fuel pump
Fit perfectly. Great price. Would buy again. Came with new electrical connector.
July 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2000Chevy C2500 Truck Chevy C2500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy C2500 Truck Chevy C2500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy C3500 Truck Chevy C3500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy C3500 Truck Chevy C3500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy K2500 Truck Chevy K2500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy K2500 Truck Chevy K2500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy K3500 Truck Chevy K3500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000Chevy K3500 Truck Chevy K3500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC C2500 Truck GMC C2500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC C2500 Truck GMC C2500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC C3500 Truck GMC C3500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC C3500 Truck GMC C3500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC K2500 Truck GMC K2500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC K2500 Truck GMC K2500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC K3500 Truck GMC K3500 Truck Fuel Pump & Sending Unit Module V8 7.4L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
1998-2000GMC K3500 Truck GMC K3500 Truck Fuel Pump & Sending Unit Module V8 5.7L with RPO Code 8J9 (RFI Filter Pump Assembly) TRQ
Part #: 1AFPU00293


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: FPA84939

How-to Video:

(16:54 min)