Replaces

1998-00 Brake Kit Front Raybestos SGD652M, 680093R - RABFS00026

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD & ROTOR KIT: SGD652M, 680093R

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Bake Pad Specifications:

  • Brand New Raybestos Service Grade Front Brake Pad Set
  • Material: Semi-metallic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 2L5Z2001AA, 2L5Z 2001 AA, F57Z2001A, F57Z 2001 A, F57Z2001AA, F57Z 2001 AA, XL2Z2001BA, XL2Z 2001 BA, ZZR049280, ZZR0 49280, ZZM049280, ZZM049280A, ZZP049280, ZZR049280, ZZR0 49280, ZZP0 49280, ZZR0 49280 A, V000D652

Brake Rotor Specifications:

  • Brand New Raybestos Service Grade Brake Rotors
  • Comes as a PAIR
  • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Fits 5 lug wheels
  • 11.28" Diameter

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the Wheel (1:00)
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 21mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:43)
    • Remove the four 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Use your 15mm socket and ratchet to remove your caliper brackets to access the rotors.
    • Pull off the brake rotor.
  3. step : Install new rotor and pads (4:10)
    • Clean new rotor with brake cleaner.
    • Check your caliper pins to make sure they are in good working order.
    • Put your caliper bracket back on, and tighten the 15mm bolts to 60-65 ft lbs.
    • Insert your new pads into the brackets.
    • Dab the sides where they slide into the brackets with anti-seize lubricant.
    • Loosen the cap on the brake fluid.
    • Use your C-clamp or caliper tool to compress your caliper.
    • Place your caliper onto the bracket.
    • Tighten your 13mm bolts to 25 ft lbs
    • Tighten the cap on your brake fluid.
  4. step : Put wheel back on (9:00)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap.
  5. step : Test and set brakes (9:05)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • Obviously this is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:28 min)

Tools List:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 21mm Socket



This part replaces:

  • Raybestos SGD652M, 680093R

Vehicle Fit

  • 1998-2000 Ford Ranger 2 Wheel Drive Front Brake Kit Semi-Metallic for Models with Front Torsion Bar Suspension Rear Wheel ABS Brakes Raybestos SGD652M, 680093R
  • 1998-2000 Mazda B2300 Truck 2 Wheel Drive Front Brake Kit Semi-Metallic for Models with Front Torsion Bar Suspension Rear Wheel ABS Brakes Raybestos SGD652M, 680093R
  • 1998-2000 Mazda B2500 Truck 2 Wheel Drive Front Brake Kit Semi-Metallic for Models with Front Torsion Bar Suspension Rear Wheel ABS Brakes Raybestos SGD652M, 680093R
  • 1998-2000 Mazda B3000 Truck 2 Wheel Drive Front Brake Kit Semi-Metallic for Models with Front Torsion Bar Suspension Rear Wheel ABS Brakes Raybestos SGD652M, 680093R
  • 1998-2000 Mazda B4000 Truck 2 Wheel Drive Front Brake Kit Semi-Metallic for Models with Front Torsion Bar Suspension Rear Wheel ABS Brakes Raybestos SGD652M, 680093R
Part #: RABFS00026

Out of Stock

Raybestos
Brand #: SGD652M, 680093R

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More