Part Details

  • Quantity: Pair

These replacement parking turn signal lights are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: F65Z 13201 AD, F65Z13201AD,F65Z 13201 AD, F65Z13201AD
  • Direct replacements
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Built to strict quality control standards
  • Correct for models built before 6/01/96 production date

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Remove the headlight (1:17)
    • Pop the hood.
    • Pull up on the two tabs at the top of the headlight.
    • Use a T20 Torx driver to remove the parking light.
    • Remove the small Torx screw and pull the parking light out.
    • Pull the headlight forward and out.
    • Unplug the wiring connector and bulbs.
  2. step : Install the new headlight (2:30)
    • Transfer the bulbs into the new headlight assembly.
    • Plug in the wiring harness.
    • Fit the headlight and parking light assembly into place.
    • Secure the parking light assembly with your T20 Torx driver.
    • Clip the tabs down to secure the headlight.
    • Close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997Ford F150 Truck Ford F150 Truck Corner Light Pair (Built Before 6/96 Production Date)
1997Ford F250 Light Duty Truck Ford F250 Light Duty Truck Corner Light Pair (Built Before 6/96 Production Date)

This part replaces:

  • Partslink FO2521132, FO2520132
  • OE # F65Z 13200 AD
  • OE # F65Z 13201 AD
Part #: 1ALPP00450


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:16 min)