This replacement tail light is just what you need to get your Camry in good looking form again!

This Camry tail light features the following specifications:

 

  • LH (driver's side)
  • Quarter panel mounted
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Camry tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light Cover (0:35)
    • Remove the three Phillips connectors
    • Remove the inner tail light cover
  2. step : Servicing the Inner Bulb ()
    • Quarter turn to the left to remove the socket
    • Pull the bulb out
    • Press the bulb into the socket
    • Click the socket clockwise
  3. step : Removing the Tail Light (1:12)
    • Disconnect the white connector
    • To remove the tail light, loosen the three 10mm nuts on the inside of the housing
    • Remove the tail light
  4. step : Servicing the Bulbs ()
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  5. step : Reinstalling the Tail Light (2:49)
    • Insert the tail light into place
    • Tighten the three 10mm nuts to the inside of the housing
    • Connect the electrical connector
  6. step : Reinstalling the Tail Light Cover (3:50)
    • Install the plastic cover
    • Turn the three Phillips connectors

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect
I repaired my totaled Camry after being rear ended and used brittle junkyard lights that fell apart. This was a much better option. Easy to install and came with the bulbs! Great product.
April 28, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-1999Toyota Camry Toyota Camry Outer Tail Light Driver Side

This part replaces:

  • Partslink TO2818115
  • OE # 81561AA010
  • DEPO 312-1916L-AF
Part #: 1ALTL00241


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:52 min)