This replacement pair of tail lights is just what you need to get your Toyota Camry in good looking form again!

These Camry tail lights feature the following specifications:

  • Comes as a Pair
  • Quarter panel mounted
  • Direct bolt on
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included

This Camry tail light pair makes a great replacement and has good cost savings over dealer units.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Tail Light Cover (0:35)
    • Remove the three Phillips connectors
    • Remove the inner tail light cover
  2. step : Servicing the Inner Bulb ()
    • Quarter turn to the left to remove the socket
    • Pull the bulb out
    • Press the bulb into the socket
    • Click the socket clockwise
  3. step : Removing the Tail Light (1:12)
    • Disconnect the white connector
    • To remove the tail light, loosen the three 10mm nuts on the inside of the housing
    • Remove the tail light
  4. step : Servicing the Bulbs ()
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  5. step : Reinstalling the Tail Light (2:49)
    • Insert the tail light into place
    • Tighten the three 10mm nuts to the inside of the housing
    • Connect the electrical connector
  6. step : Reinstalling the Tail Light Cover (3:50)
    • Install the plastic cover
    • Turn the three Phillips connectors

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Perfect fit, Easy install
The parts I ordered we're a perfect fit for my 1998 Toyota Camry and we're easy to install. Bulbs are included.
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Toyota Camry Outer Tail Light Pair

This part replaces:

  • OE # 81551AA010
  • OE # 81561AA010
  • Partslink TO2819115, TO2818115
Part #: 1ALTP00044

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:52 min)