Specifications

  • Comes as a 4 Piece Kit
  • Fits LH (Driver Side) & RH (Passenger Side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Lights are complete and ready to install
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: To replace the bulb (1:00)
    • Unplug the connector
    • Remove the dust cover.
    • Move the wire to the side.
    • Pull the headlight bulb out and replace it.
  2. step : Step 2: Remove the headlight assembly (2:03)
    • Remove the parking light with a flat blade screwdriver and a rag.
    • Unplug your parking lights and set them aside.
    • Unplug/remove the bulbs.
    • Remove the two 10mm bolts on the headlight assembly.
    • Unclip the headlight assembly from the adjustor.
  3. step : Step 3: Install headlight (5:27)
    • Clip the headlight assembly back onto the adjustor.
    • Use your 10mm socket and ratchet and bolt the assembly back in.
    • Put the bulbs back in and plug them in.
    • DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Re-install your parking light.
    • Line it up and clip it back in.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.5 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
2
1
0
0
Feeling good about my purchases
This is the second product that I have purchased from here and I'm satisfied so far I'm in route to purchase more very soon so keep up the good workWrite
May 17, 2018
Purchased
1 month ago
1999 Toyota Camry Headlight review
Good quality product and perfect fit on my 1999 Toyota Camry for the OEM replacement headlights! Would recommend.
February 7, 2018
Purchased
4 months ago
Perfect fit
The kit came with all bulbs, the lenses look sturdy, and all connectors fit exactly as needed. Be careful removing the push-pins for the turn signals. Those can age an break and the kit does not contain any fasteners.
February 3, 2018
Purchased
5 months ago
Camry Headlight Kit
Parts arrived on time, great price too. I found that the headlight installed alot easier if the 2 adjusters are moved almost all the way in. This makes more room behind the bumper for the headlight and allows the rubber strip on the bottom to fit in behind the bumper. If the rubber strip was on top of the bumper, the headlights fits way too tight and would not adjust. Very happy with this purchase, installation was quick, thanks to the video.
January 25, 2018
Purchased
5 months ago
Good headlight replacements
This product came and was easy to install. However, I had to spend a few nights adjusting the focus of the headlights which is an easy process. I would recommend these for others that have faded lights.
September 20, 2017
Purchased
10 months ago
Cannot aim them to road level
The lamps are crystal clear and fit the vehicle perfectly. However, on the set I received, there was a significant flaw that did not allow me to be able to aim the headlamps low enough to actually get the beam onto the road surface. Each time I would adjust the vertical adjuster screw, just when the beam would get low enough in the arc to almost work, the small ball on the ball on the front of the adjuster would pop out of the nylon retainer, and you would have to remove the lamp assembly and start all over. I tried this 4 times with both headlamps without success. I removed the adjusters and checked them for visible flaws, and finding none, I transferred the complete adjuster assemblies from the OEM lamps that I was replacing, (Not an easy thing to do without breaking old plastic) and immediately was able to aim the new lamps. I am suggesting that there is a flaw somewhere in the product that either places too must pull on the adjuster/ball/retainer where it locks into the bottom of the lamp housing, or there is a placement or positioning issue that makes the ball pop out. Could not use the adjusters that came with the lamps AT ALL.
September 18, 2017
Purchased
10 months ago
Toyota headlamp kit
Terrific. Looks great. Popped in quickly. Buy this headlamp set. A great deal...
August 15, 2017
Purchased
10 months ago
Great improvement to car
Really like this product-however video left out a few things like driver side replacement (mentioned as different but needs to be seen and demonstrated). Also snap tabs that came off easily in 98 toyota were changed in 99 on driver side to nearly impossible to pop out. But overall video was very helpful showing all locations to loosen/remove old lights (headlight and turning light). After changing driver side that took me almost 50 minutes with pop up tab problems, only took 15 minutes to change passenger side lights with experience learned from driver side. Video was helpful.
May 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Toyota Camry 4 Piece Set Lighting Kit

This part replaces:

  • Partslink TO2502117
  • Partslink TO2503117
  • Partslink TO2530126
  • Partslink TO2533103
  • Hollander 114-58471L
  • Hollander 114-58471R
  • Hollander 116-58605L
  • Hollander 116-58605R
  • OE # 81110AA010
  • OE # 81150AA010
  • OE # 81510AA010
  • OE # 81511AA010
Part #: 1ALHT00028

Out of Stock

How-to Video:

(07:56 min)