Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Raise and secure the vehicle (1:23)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (2:45)
    • Use a wrench to secure the top of the link and a socket and breaker bar on the bottom.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (3:16)
    • Thread the stabilizer link, bushings and washers into the control arm and sway bar.
    • Use your wrench to secure the link and a socket and ratchet to tighten it up.
    • The torque spec is 13 foot lbs.

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Chevy Cavalier Steering & Suspension Kit 8 Piece Set
  • 1997-1999 Pontiac Sunfire Steering & Suspension Kit 8 Piece Set

This part replaces:

  • Moog K6527
  • Moog ES3374RL
  • Moog K6600
  • Hollander 527-01256A
  • OE # 22156939
  • OE # 26057931
  • Monroe 181973
  • Monroe 171973
  • KYB SR4024
Part #: 1ASFK04931



How-to Video:

(06:25 min)