Replaces

1997-99 Ford F150 Truck Brake Kit Front Nakamoto MD679, 54040 - 1ABFS00410

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi  SEMI-METALLIC Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Fits 5 Lug wheels
  • Correct for 2WD models with REAR ABS only
  • Replaces dealer part numbers: F65Z1102AC, F65Z 1102 AC, F85Z1102DA, F85Z 1102 DA, XL3Z1102EC, XL3Z 1102 EC

This front brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Note:
The rotors do not include wheel bearings or seals.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 12.13" (308mm)
  • Front Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:00)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  3. step : Preparing the New Brake Pads and Caliper (3:05)
    • Remove the brake pad brackets
    • Remove the caliper boot slides
    • Clean the brake pad brackets with a wire brush
    • Clean the caliper bracket with a wire brush
    • Clean off the caliper boot sliders and inspect the boots
    • Apply grease to the caliper slides
    • Insert the slides into the caliper
    • Press on the brake pad brackets
    • Apply grease to the brake pad slides
  4. step : Installing the New Brake Rotor (9:20)
    • Slide the rotor on backwards
    • Clean the rotor with brake parts cleaner
    • Turn the rotor around
    • Clean the rotor with brake parts cleaner
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 136 foot-pounds of torque
  5. step : Installing the New Brake Pads (11:12)
    • Apply grease to the brake pad tabs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 21-26 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  6. step : Reattaching the Wheel (14:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 83-112 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (14:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill Bit Set

  • General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Brake Parts Cleaner
  • Safety Glasses
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Do the rotors have the bearings in them?
Mchael on Jul 27, 2017
BEST ANSWER: No, neither the bearings or seals are included.

Vehicle Fit

  • 1997-1999 Ford F150 Truck Front Brake Kit 2 Wheel Drive with 5 Lug Wheels (excluding 4 Wheel ABS Brakes) Premium Posi Semi-Metallic Nakamoto

This part replaces:

  • Nakamoto MD679, 54040
Part #: 1ABFS00410

Out of Stock

Nakamoto
Brand #: MD679, 54040

How-to Video:

(14:56 min)