Replaces

1997-98 Jeep Grand Cherokee Parking Light - 1ALPK00133

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Jeep Grand Cherokee parking light is just what you need to get your Cherokee in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts below the headlight
  • Does not include bulbs or wiring
  • Uses 2-tab Socket

This Jeep Grand Cherokee parking lamp is a great replacement and has good cost savings over a parking light from the dealer.

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:35)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Removing the side marker light (1:05)
    • Use your No. 2 Torx screwdriver to remove the screws securing the side marker light.
    • Pull the headlight out.
    • Unplug the harness.
    • Clean the studs the headlight assembly with a wire brush.
    • Spray with penetrating oil.
  3. step : Installing the new headlight assembly (3:00)
    • Plug in the harness.
    • Clip the new headlight back into place.
    • Screw the side marker light assembly back into place with your No. 2 Torx screwdriver.

Tools needed for replacement:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Torx Drivers & Sockets

  • Number 2 Torx driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-1998Jeep Grand Cherokee Jeep Grand Cherokee Parking Light Passenger Side
Part #: 1ALPK00133


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:08 min)