1997-98 Jeep Grand Cherokee Grille, Header Panel & Light Set - 1ABGK00017

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement grille kit is just what you need to get your vehicle in good looking form again!


  • FRONT Steering Kit includes:
    • (1) - BLACK Grill (Grille)
    • (1) - Header Panel (without leveling device)
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Side Marker Lights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Park/Signal Lights - LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 5DN46SX8, 55055119AB, 55055118AB, 56005105, 56005104, 55054996AB, 56005099AB, 56005098AB
  • Grille (Grille) is BLACK in color
  • sockets and bulbs are not included
  • Direct replacements
  • Built to strict quality control standards

This grill kit makes a great replacement and has substantial cost savings over dealer parts.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:35)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Removing the side marker light (1:05)
    • Use your No. 2 Torx screwdriver to remove the screws securing the side marker light.
    • Pull the headlight out.
    • Unplug the harness.
    • Clean the studs the headlight assembly with a wire brush.
    • Spray with penetrating oil.
  3. step : Installing the new headlight assembly (3:00)
    • Plug in the harness.
    • Clip the new headlight back into place.
    • Screw the side marker light assembly back into place with your No. 2 Torx screwdriver.

Tools needed for replacement:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Torx Drivers & Sockets

  • Number 2 Torx driver

4.40/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great service!
Our parts were here in three days..all the parts were there and fit perfectly..the price was more than reasonable and the free shipping was great!
January 31, 2017
I love it
I really liked the set. Made the jeep look good. I recommend yall to all of my friends
June 28, 2017
Price is good... quality is negligible
I wasnt really expecting a lot from this kit based on the price. But its not bad... the headlights and turn signals fit and look good. That header panel though. The factory piece is thick fiberglass so it doesnt have any flex to it. The one supplied in this kit is flimsy plastic. It works, but doesnt secure the lights as good as I would like. They could do a better job making the header panel. Seriously... The grille looks really good, wasnt black as stated but more of a dark grey color. It was as good as the factory piece though. Not a bad kit... It works. Could be better...
July 7, 2017
Kit was easy to install, everything lined up perfectly the first time and I have also received many compliments on the color of the grill
July 25, 2017
Its a A plus
Received within 5 days all parts in one large box. All parts for well easy installation. Have Jeep a great looking updated front end received many compliments on it. Would deffinately and have recomened 1 A Auto to friends. Will be ordering more parts in the near future. Was very pleased with my experience.
February 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How how easy is it to put a lift kit on a 3 & a half inch on a 98 Grand Cherokee Laredo?
Doug H July 8, 2016
Depends on a lot. Technical ability. Availability of certain tools. How much rust is there under the vehicle and bolts. Its not "easy" nor quick. Also depends on what lift you are installing. Consider a dropped pitman arm also at the tome the lift is installed.
Brian F July 8, 2016
Year Make Model Description
1997-1998Jeep Grand Cherokee Jeep Grand Cherokee Black Grille, Header Panel & Light Set
Part #: 1ABGK00017

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:08 min)