This replacement grille is just what you need to get your vehicle in good looking form again!

Specifications:

  • Injection molded plastic silver outer shell
  • Chrome plated plastic outer surround with painted silver fins
  • Horizontal crease in the center section
  • High quality item that is built to strict quality control standards
  • Direct bolt on
  • Has proper area for the Ford emblem (not included)

Makes a great replacement and has good cost savings over a dealer unit.

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Contiguous U.S. (lower 48 states).

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Lights (0:46)
    • Open the hood
    • Lift up the tabs on the headlight
    • Work the headlight out
    • Pry out the headlight
    • Disconnect the headlight wiring harness
    • Remove the 7mm screw from the turn signal light
    • Pull the turn signal light forward
    • Disconnect the turn signal wiring harness
    • Repeat these steps on the other side
  2. step : Removing the Grille (1:55)
    • Unclip the spare tire tool from the hood cowl
    • Remove the six plastic pins from the top of the hood cowl with a Phillips screwdriver
    • Remove the two plastic pins from the back of the hood cowl with a trim tool
    • Lift off the grille cover
    • Remove the ten Phillips screws from the grille
    • Pry the two plastic clips out of the air dam on each side
    • Pull the grill forward and off
    • Pry the two air dams off each side of the bumper with a trim tool
  3. step : Installing the Grille (4:25)
    • Clip the air dams to the new grille
    • Attach the clips to the bottom of the grille
    • Pull the adhesive strip off the badge
    • Line up the badge on the grille
    • Press the badge onto the grille
    • Line up the grille
    • Push the grille clips into the header panel
    • Insert the ten Phillips screws into the grille
    • Push the two clips into the air dam on each side
    • Line up the hood cowl
    • Push the six plastic clips into the top of the hood cowl
    • Push the two plastic clips into the back of the hood cowl
  4. step : Installing the Lights (7:56)
    • Connect the turn signal wiring harness
    • Line up the turn signal light
    • Fasten the 7m screw into the turn signal light
    • Connect the headlight wiring harness
    • Line up the headlights, using the studs
    • Lock in the headlight tabs
    • Adjust the headlight aim as necessary by turning the studs
    • Repeat these steps on the other side
    • Clip the spare tire tool to the hood cowl
    • Close the hood

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1998 Ford Expedition Chrome & Silver Grille
  • 1997-1998 Ford F150 Truck Chrome & Silver Grille
  • 1997-1998 Ford F250 Light Duty Truck Chrome & Silver Grille

This part replaces:

  • Partslink FO1200330
  • OE # F85Z 8200 EAA
Part #: 1ABGR00113


How-to Video:

(09:48 min)