• Brand New Headlights
  • Fits LH (Driver Side)
  • Bulbs not included
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove the headlight assembly (1:06)
    • Pop the hood and secure it.
    • Unbolt the two 10 mm bolts with your socket and ratchet.
    • Slide your headlight assembly to the side and out.
    • Disconnect the bulbs and wiring harness connections.
  2. step : Transfer the wiring harness and bulbs to the new assembly. (2:35)
    • Take the screw securing the parking light out of both assemblies.
    • Remove the parking light and disconnect the wiring from the old assembly.
    • Connect the bulbs and harness to the new assembly and replace the screw securing the new parking light to the new headlight.
  3. step : install the new headlight assembly (5:42)
    • Connect the wiring harness.
    • Line up the tabs and bolt the headlight assembly in.
    • Use your 10 mm socket and ratchet.
    • Close the hood.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fast shipping & great product
October 30, 2009
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2003Pontiac Grand Prix Pontiac Grand Prix Headlight Driver Side

This part replaces:

  • Partslink GM2502170
  • Hollander 114-00596L
  • TYC 20-5122-09-1
  • DEPO 332-1177L-UFC
  • OE # 16526111
Part #: 1ALHL00267

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:12 min)