This replacement mirror is just what you need to get your truck in good looking form again!

Specifications:

  • Fits the LH (Driver Side)
  • Power
  • Heated
  • Manual Folding
  • Injection molded Paint To Match plastic housing
    • Can be painted by the buyer to any color desired or installed as is
  • Direct replacement mirror
  • Built to strict quality control standards
  • Without Turn Signal

This mirror makes a great replacement and has substantial cost savings over a dealer unit.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:54)
    • Pry off the triangular panel.
    • Pry up the switch panel and disconnect the harnesses.
    • Pry out the mirror switch and disconnect it.
    • Remove the reflector.
    • Remove the Phillips screws.
    • Remove the door handle bezel.
    • Lift the panel up and off.
  2. step : Removing the Side Mirror (1:25)
    • Remove the door handle by removing the 8mm bolts and pushing the handle rod out.
    • Remove the speaker and disconnect it.
    • Carefully remove the water shield.
    • Disconnect the Mirror Harness.
    • Remove the three 11mm nuts that secure the mirror.
    • Pull it out and off.
  3. step : Replacing the Side Mirror (4:53)
    • Feed the harness down through the door.
    • Line up the mirror and push it into place.
    • Replace the three 11mm nuts.
    • Reconnect the mirror harness.
    • Replace the water shield.
    • Reconnect and replace the speaker.
    • Replace the door handle rod to the door handle.
    • Replace the two 8mm bolts.
  4. step : Replace the Door Panel (6:50)
    • Put the panel down into place.
    • Replace the Phillips screws.
    • Replace the door handle bezel.
    • Replace the reflector.
    • Reconnect and replace the mirror switch.
    • Reconnect and replace the switch panel.
    • Replace the triangular panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 6mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2002 Ford Expedition Power Heated Smooth Black - Paint to Match Mirror Driver Side
Part #: 1AMRE02251



How-to Video:

(07:40 min)