Specifications

  • RH (Passenger Side) FRONT DOOR
  • Power operation
  • Direct replacement
  • Includes power window motor already assembled to regulator
  • Built to strict quality control standards

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove door panel. (0:55)
    • For more detailed instructions see our other videos.
  2. step : Step 2: Remove Regulator (1:42)
    • Remove the door handle by removing the 10mm bolt.
    • Remove the plate with the 3 phillips screws.
    • Carefully remove the water shield.
    • Take care not to rip it, as it keeps water from getting into your door.
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Remove your power window harness.
    • Remove the bolts with your wrench or socket and ratchet.
    • Take out the motor and the regulator.
  3. step : Step 4: Install the new regulator (4:35)
    • Attach the new motor to the regulator using the bolts that came with it.
    • Replace the regulator and motor back into their original positions.
    • Feed the harness back through.
    • Bolt the track back in.
    • Tighten the regulator bolts and your power window motor bolts.
  4. step : Step 5: Test (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  5. step : Step 5: Test (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  6. step : Step 6: Re-assemble (7:13)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
Good but definitely not perfect
This was not modeled directly after the oem part. It's a little more loosey goosey and not as robust. I don't recall, but it did not seem to align exactly (perhaps), but in frustration, I undid the new motor from the assembly and attached it to the old assembly. I was only able to align two out of the 3 wholes required, but it works fine for now.

If you can just get the motor, probably recommend doing that and using your old assembly. Happy with A1 overall though!
January 11, 2016
Purchased
over 3 years ago
Perfect fit
The part worked out like a charm! My car window is working again! Thank you
July 26, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2001 Toyota Camry Front Power Window Regulator with Motor Passenger Side

This part replaces:

  • OE # 69801AA020
  • OE # 85710AA020
  • OE # 6980133010
  • Partslink TO1351124
  • Hollander 135-58330R
Part #: 1AWRG00093

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(09:16 min)