Part Details

  • Regulator Option: without Motor
  • Operation: Power

Specifications:

  • LH (Driver Side) REAR DOOR
  • Does NOT include the power window motor
  • Replaces dealer part number: 69804-AA010, 69804AA010
  • Direct replacement
  • Built to strict quality control standards

 

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove door panel. (0:55)
    • For more detailed instructions see our other videos.
  2. step : Remove Regulator (1:42)
    • Remove the door handle by removing the 10mm bolt.
    • Remove the plate with the 3 phillips screws.
    • Carefully remove the water shield.
    • Take care not to rip it, as it keeps water from getting into your door.
    • Plug your power windows back in and tape it up.
    • Lift up the window and tape it up out of the way.
    • Remove your power window harness.
    • Remove the bolts with your wrench or socket and ratchet.
    • Take out the motor and the regulator.
  3. step : Install the new regulator (4:35)
    • Attach the new motor to the regulator using the bolts that came with it.
    • Replace the regulator and motor back into their original positions.
    • Feed the harness back through.
    • Bolt the track back in.
    • Tighten the regulator bolts and your power window motor bolts.
  4. step : Test the regulator (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  5. step : Test the regulator (6:00)
    • Test the to make sure the wiring is hooked up correctly.
    • Untape and bolt in the window.
    • Test again to make sure the window isn’t straining and everything works.
  6. step : Re-assemble the door panel (7:13)
    • Replace the water shield.
    • Reassemble the door panel.
    • For more detailed instructions refer to our other videos.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T27 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2001Toyota Camry Toyota Camry Rear Power Window Regulator without Motor Driver Side

This part replaces:

  • Hollander 135-50388L, 135-50390L
  • Dorman 740-829
  • OE # 69804AA010
Part #: 1AWRG01781


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:16 min)