Replaces

1997-01 Lexus ES300 Toyota Camry Exterior Door Handle - 1ADHE01219

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Beige

This replacement door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Beige (factory color code 4M9) Painted Finish
  • Replaces dealer part number: 69210-33041-E0, 6921033041E0
  • Reinforced from the original design
  • Plastic construction
  • Reuse your original lock cylinder

NOTE: This color is an exact match for the original factory color.  Due to things such as UV rays, weather, and age, your vehicle's paint may have faded since it was first painted.

This part makes a great replacement and provides a good value.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:38)
    • Pry off the trim piece inside the door handle
    • Pry off the trim button on the arm rest
    • Pry off the trim button on the door panel
    • Pry up the switch panel
    • Disconnect the window switch wiring harnesses
    • Pry off the sail panel
    • Remove the three Phillips head screws on the arm rest
    • Remove the two Phillips head screws on the bottom of the door panel
    • Remove the Phillips head screw in the top left corner
    • Remove the Phillips head screw from the door handle
    • Pry off the door handle bezel
    • Pop out the bottom of the door panel
    • Pull the door panel up and off
    • Carefully remove the water shield
  2. step : Removing the Interior Door Handle (3:01)
    • Remove the Phillips head screw from the door handle
    • Pull off the metal latch rods from the door handle
    • Remove the metal plate
    • Carefully pry off the weather shield
  3. step : Removing the Exterior Door Handle (4:24)
    • Connect the window switch
    • Turn the key to the run position
    • Raise the window
    • Disconnect the door handle latch rod
    • Pry the door latch rod from the door handle
    • Remove the safety latch from the lock rod
    • Push the lock rod out of the door handle
    • Remove the two 10mm bolts from the door handle
    • Lift the door hand up and out
    • Remove the 10mm screw from the lock cylinder
    • Remove the lock cylinder from the door handle
  4. step : Installing the Exterior Door Handle (6:37)
    • Insert the lock cylinder into the new door handle
    • Insert the door handle into the door
    • Tighten the 10mm screws to the door handle
    • Insert the lock rod into the lock cylinder
    • Close the clip on the lock rod
    • Insert the door handle rod into the door handle
    • Close the latch onto the rod
    • Press the watershield to the inside of the door
  5. step : Installing the Interior Door Handle (8:23)
    • Insert the metal shield into place
    • Tighten the three Phillips screws to the shield
    • Insert the lock rod into the door handle
    • Insert the hooks into the door and slide the handle back
    • Tighten the Phillips screw to the door handle
  6. step : Reinstalling the Door Panel (9:42)
    • Lift the door panel into place
    • Push in the door panel clips
    • Tighten the two Phillips head screws at the bottom
    • Tighten the three Phillips head screws to the arm rest
    • Tighten the Phillips head screw to the top left of the door panel
    • Connect the window switch wiring harness
    • Press the window switch into place
    • Insert the door handle trim bezel into place
    • Tighten the Phillips screw to the door handle trim
    • Press the trim bezel inside the door handle in

Tools needed for replacement:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Finally worked after4.5 hr,it could have been, my large hands.
Both are complete, glad its over, nothing like finishing a job well done. Thanks for your Help
January 21, 2017
Quality at the Right Price
This is the 3rd handle on my Camry I have had to replace. The other 2 I purchased off eBay for $5-$8 per handle. I am dissatisfied with how cheap those feel and how lame they are, they work, but they are super lame. So I went searching for a better quality one that was cheaper than a factory Toyota handle ($125+tax). When I found it on 1A Auto for $20, I bought it without hesitation. I have had great experience with their parts in the past so I went for it and I was not disappointed. The quality of this handle is awesome. Almost factory quality, significantly more quality than the eBay handles. Very happy with this product and my purchase.
May 2, 2018
World Class Company - Very User Friendly
My first experience with 1AAuto: I ordered wrong part - my mistake Called A1 - immediately got knowledgeable representative Was told how to return for credit and how to reorder correct part No problem - No hassle Within days had the right part Great Service -Great Price
May 31, 2018
1st the driver side, now the passenger side.
I replaced the driver side exterior handle about a month ago , with the part coming from 1A Auto (see that review on that product page), and then the passenger side exterior one broke. It was easier the second time around, but still had problems getting off the plastic retainer for the lock rod, and had to get in there with an open end wrench...very tedious. Once loose I pulled the handle through the opening and the plastic retainer was still very difficult to remove from the rod; but I got it off and got the new handle installed. Now the passengers front interior door handle broke. I will buy that from 1A Auto, I like the parts theyve sent so far, but this time I need the right color. For the exteriors they only came in metallic beige and my car is silver, but that was OK for the exterior ones, but again, I want the right matching color for the interior because I cant paint that; and I had to glue the bezel back together on the inside handle after taking the panel off to replace the exterior handle, I wont be able to reuse/reglue that again (for color).
July 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2001Lexus ES300 Lexus ES300 Front Beige Exterior Door Handle Passenger Side
1997-2001Toyota Camry Toyota Camry Front Beige Exterior Door Handle Passenger Side
Part #: 1ADHE01219


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:18 min)