Replaces

1997-01 Honda CR-V Steering & Suspension Kit - 1ASFK02405

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 16 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 16 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Rear Shock & Spring Assemblies
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:40)
    • Loosen the lug nut covers
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Tie Rod (1:00)
    • Measure from the boot to the outer tie rod and record it
    • Loosen the 19mm nut on the tie rod with a 19mm wrench
    • Remove the cotter pin with pliers
    • Remove the castle nut with a 17mm socket
    • Hit the knuckle with a hammer
    • Twist the tie rod out
  3. step : Installing the New Tie Rod (2:13)
    • Twist on the new tie rod
    • Push the outer tie rod down into the knuckle
    • Replace the castle nut
    • Push the cotter pin into place and bend the ends in separate directions with pliers
    • Measure and double check the distance of the boot to the tie rod
    • Turn the tie rod joint with the 14mm wrench to adjust the distance
    • Replace and tighten the 19mm nut
  4. step : Reattaching the Wheel (3:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Very good parts fast delivery love it
Deffently will tell family and friends about this and how fast ur delivery comes in. Thank u
April 1, 2018
Purchased
5 months ago
It was great serves no complaints everything came when it was suppose to and I wasn't missing anything I thank u guys at 1A auto for everything and I will continue to do bissnues with you guy
January 24, 2018
Purchased
7 months ago
I can't complain about these products i bought them for my car since it needed an overhaul for sure. My suspensions are running like a new car and steering system is superb. For the price i paid for these products i can and will recommend to my friends and family because if bought separately it would has cost me 3 times as much.The products are of great quality and fit on car with no problems. I will consider buying from 1A Auto again in the future only because they have a great team and customer service is to the point. prices are definitely great, low and delivered in a few days. Thank you 1A Auto.
July 28, 2016
Purchased
over 2 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
what brand are these parts?
Fred B on Jul 27, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
1997-2001Honda CR-V Honda CR-V 16 Piece Set Steering & Suspension Kit

This part replaces:

  • Monroe 171583L
  • Monroe 171583R
  • Monroe 171325
  • Moog K9802
  • Moog ES3332R
  • Moog ES3331R
  • Moog K90667
  • Moog EV414
  • Moog K80884
  • Moog K80883
  • Moog K90669
  • Moog K90668
  • Beck Arnley 101-4698
  • Dorman 520-647
  • Dorman 520-648
  • Hollander 511-58133L
  • Hollander 511-58133R
  • OE # 53560S04013, 53560S04013
  • OE # 53540S04013, 53540S04003
  • OE # 53010S10003, 53010S1000
  • OE # 52321S10003
  • OE # 51460-S10-020
  • OE # 51450-S10-020
  • OE # 51320S04003
  • OE # 52320S10003
Part #: 1ASFK02405


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:54 min)