Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      11.06" (281mm)
      Vented
      5 Lug
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      (1) Rear Brake Shoe Set
      (1) Front Semi-Metallic Brake Pad Set
      (2) Rear Brake Drums
      (2) Front Replacement Brake Rotors
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Brake Rotor Specifications:

  • 5 Lug
  • 11.10" (282mm) Front vented diameter

Rear Brake Drum Specifications:

  • 9" x 2-1/2"

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:54)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Removing the Brakes (1:20)
    • Pull off the brake drum
    • Remove the springs with locking needle-nose pliers
    • Push the piston in by hand and lock the rubber in place
    • Remove the tabs with the pliers
    • Pull the brake shoes apart
    • Remove the front brake shoe
    • Remove the separator bar
    • Pull the rear brake shoe off the emergency brake cable
    • Remove the emergency brake lever from the rear brake shoe
  3. step : Installing the Brakes (3:59)
    • Connect the emergency brake lever to the new rear brake shoe
    • Attach the rear brake shoe to the emergency brake cable
    • Apply white grease to the contact areas on the backing plate
    • Put the rear shoe into place
    • Insert the tab
    • Make sure the separator bar adjusts freely
    • Insert the separator bar
    • Attach the front shoe to the rear shoe via the spring
    • Put the front shoe into place
    • Insert the tab
    • Reattach the springs with the pliers
    • Slide the brake drum on
  4. step : Reattaching the Wheel (7:37)
    • Slide the wheel into place
    • Put the hub cap on
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. step : Testing the Brakes (8:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2001Honda CR-V Honda CR-V Front & Rear Premium Posi Semi-Metallic Brake Kit
Part #: 1ABFS03081


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:38 min)