1996 Jeep Grand Cherokee Grille, Header Panel & Light Set - 1ABGK00024

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Color:   Black


  • FRONT Steering Kit includes:
    • (1) - BLACK Grille
    • (1) - Header Panel (without leveling device)
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Side Marker Lights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Park/Signal Lights - LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 5DN46SX8, 55055119AB, 55055118AB, 56005105, 56005104, 55054996AB, 56005099AB, 56005098AB, 56005099, 56005098
  • Grille comes black
    • can be painted by buyer to match or installed as is
  • Park/Signal Lights fit models with 2 lamp sockets
    • Sockets and bulbs are not included
  • Direct replacements
  • Built to strict quality control standards


NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Handling the Bulbs (0:35)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : Removing the side marker light (1:05)
    • Use your No. 2 Torx screwdriver to remove the screws securing the side marker light.
    • Pull the headlight out.
    • Unplug the harness.
    • Clean the studs the headlight assembly with a wire brush.
    • Spray with penetrating oil.
  3. step : Installing the new headlight assembly (3:00)
    • Plug in the harness.
    • Clip the new headlight back into place.
    • Screw the side marker light assembly back into place with your No. 2 Torx screwdriver.

Tools needed for replacement:

    General Tools

  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Torx Drivers & Sockets

  • Number 2 Torx driver

3.75/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great kit
This product is a great product. However it would be useful to note that it did not come with any of the attachment Hardware or the light adjustment Hardware. I had to swap them from my old assembly. One other thing that was wrong on my particular Jeep was that the turn signal lights are made for a 3 prong light housing, when my lights where made for a 2 prong housing. That all being said it is a great product and would recommend. It also came with lamps for the headlights themself which was a nice bonus.
November 19, 2017
The parts fit, that’s about it
The replacement parts came early and fit that’s where the good stops. The plastic is very cheap and brittle, easily just as weak as the original header that has been on there the last 21 years. Went to put the bulb carrier back in the side marker light and the part that locks the bulb in broke. Will not be looking for a good deal but strong parts next time, absolutely ridiculous these brand new parts are already broken! They look pretty they fit but they aren’t jeep parts.
November 29, 2017
Looks Great
Every thing I ordered worked perfect. All from one location. I didnt have to hunt around for what was needed. Inwill definitely be back for and auto parts in the future.
May 4, 2018
It worked
Ended up being the wrong year ( i have a 95 and we thought it would work), but we jury rigged it to work anyways
November 6, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Why will this not fit a 98 grand Cherokee?
Alonso H July 21, 2016
Though the bodys looked exact, Jeep actually have a 1st and 2nd design of this ZJ model. The minor changes including the mounting and installation of these components making them a non interchangeable application
Brian F July 21, 2016
My jeep is a laredo will this fit my 1996 grand cheroker?
Woody H March 15, 2017
Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Tim K March 15, 2017
Year Make Model Description
1996Jeep Grand Cherokee Jeep Grand Cherokee Black Grille, Header Panel & Light Set
Part #: 1ABGK00024

Out of Stock

How-to Video:

(05:08 min)