1996 Ford Exhaust Manifold - 1AEEM00091

Our aftermarket manifolds are some of the highest quality replacements on the market!

If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This cast iron manifold has been designed to eliminate the faults of the original design.

Specifications

• RH (Passenger Side)
• 2 bolt flange
• Replaces dealer part numbers: F6TZ-9430-C, F6TZ9430C
• Direct replacement
• Replaces original manifolds that are cracked from thermal expansion and contraction
• Corrosion resistant
• Strengthened and redesigned in the vulnerable areas of failure
• Has provision for Oxygen Sensor

Now you can buy a superior quality exhaust manifold for 1/2 the price of the dealer and end your worries of cracking and breaking. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Built to strict quality control standards, is a great replacement, and has substantial cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.