This replacement egr and tube kit is just what you need to get your emissions in good working order again! Anyone who has tried to replace an old EGR valve knows the problems that come with trying to replace them!

Over time from the hot and cold cycles of the engine and corrosive exhaust gases running through the egr tube, will cause the egr pipe to rust so badly that the tube will crumble in your hands if you try to move it. Also, many times when the EGR valve is replaced, these tubes are either frozen to the valve or the exhaust manifold making it impossible to remove them without twisting and breaking them off.  Now you can get both together to save time, money, and hassle!

Specifications:

  • Built to strict quality control standards
  • Replaces dealer Part Numbers: F4TZ-9D475A, F4TZ9D475A, F0TZ9D477A, F0TZ 9D477 A
  • Brand new, not rebuilt or remanufactured
  • Built to strict quality control standards
  • Helps Restore proper emissions

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996 Ford Bronco EGR Valve & Tube Kit V8 5.8L (8th Vin Digit H)
  • 1996 Ford E150 Van EGR Valve & Tube Kit V8 5.8L (8th Vin Digit H)
  • 1996 Ford E250 Van EGR Valve & Tube Kit V8 5.8L (8th Vin Digit H)
  • 1996 Ford F150 Truck V8 5.8L (excluding California Emissions) EGR Valve & Tube Kit
Part #: 1AEEK00533