1996-99 Subaru Legacy Legacy Outback Muffler with Gasket Rear - 1AEMK00041

Part Details

  • Front or Rear Location: Rear


  • Direct Fit Rear Muffler Section with Gasket
  • 2 bolt flange connection
  • Direct bolt on replacement
  • No modification necessary
  • Replaces dealer part number: 44305AC360, 44305AC410, SOA8376700
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Due to the nature and size, exhaust parts may incur minor dents or scratches from handling and load shifting during shipping. These damages do not affect the fit or function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these insignificant damages.

  1. step : Removing the Tailpipe and Muffler (1:22)
    • Lift the car.
    • Spray rust penetrant on the two nuts at the end of the tailpipe.
    • Remove the 9/16 bolts from the end of the tailpipe with the socket and wrench.
    • Use a screwdriver to pry the end of the tail pipe free.
    • Put the bolts back in without the nuts.
    • Push the hangers off of the muffler. Pull the bolts out and pull the muffler and tailpipe free.
  2. step : Installing the New Muffler and Tailpipe (4:28)
    • Spray rust penetrant on the hangers and bolts.
    • Put the tailpipe hanger on first.
    • Put the muffler hangers in place.
    • Put the bolt through and hang the gasket on the bolt.
    • Twist the gasket up into place and insert the other bolt.
    • Line the tail pipe onto the bolts and thread the nuts.
    • Tighten the nuts making sure the gasket stays centered. Tighten to 25 - 30 ft/lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - SAE

  • 9/16 Inch Socket

  • Wrenches - SAE

  • 9/16 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-1999Subaru Legacy Subaru Legacy Wagon Rear Muffler with Gasket H4 2.5L
1996-1999Subaru Legacy Outback Subaru Legacy Outback Rear Muffler with Gasket H4 2.5L
Only 2 left in stock
Part #: 1AEMK00041

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:16 min)