1ASFK02000-1996-98 VW Golf Jetta Steering & Suspension Kit 10 Piece Set


1996-98 VW Golf Jetta Steering & Suspension Kit 10 Piece Set TRQ PSA58792


Part Details

  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Rear Strut & Spring Assemblies
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Monroe 181265
  • Monroe 171933
  • Monroe 171265
  • Moog ES3014R
  • Moog ES3015R
  • Moog K90117
  • Moog K9603
  • Beck Arnley 101-5205
  • Hollander 527-58057
  • OE # 191419812
  • OE # 191411315B
  • OE # 191419811
  • OE # 357407365
Save 36%
List: $410.95 Save: $146.00
Part 1ASFK02000
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA58792

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Rear Strut & Spring Assemblies
      (2) Front Strut & Spring Assemblies
      (2) Front Inner Tie Rods

This replacement steering and suspension kit is just what you need to get your vehicle in good working order again.


  • Comes as a SET of 10
    • Strut Assembly - LH (Driver Side) & RH (Passenger Side) FRONT & REAR
    • Lower Ball Joint - LH (Driver Side) & RH (Passenger Side) FRONT
    • Inner Tie Rod End - LH (Driver Side) & RH (Passenger Side) FRONT
    • Outer Tie Rod End - LH (Driver Side) & RH (Passenger Side) FRONT
  • Each strut assembly includes:
    • Upper Mount
    • Upper and Lower Spring Isolators
    • Upper Spring Seat
    • Coil Spring
    • Boot Kit
  • Preassembled for easier replacement
  • Fit models with L4 2.0L engines ONLY

We recommend performing an alignment after replacement.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the top of the strut (1:05)
    • Pop the hood and secure it.
    • Apply penetrating oil to the 21 mm nut at the top of the strut.
    • Use a 7 mm Allen wrench to secure the bolt and use your 21 socket and ratchet to remove the nut.
  2. step : Remove the wheel (3:12)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  3. step : Remove the bottom of the strut (4:15)
    • Use a breaker bar and penetrating oil to unbolt the 18 mm strut bolts on the bottom
    • Remove the ABS bracket with your 10 mm socket and ratchet
    • Pull the strut down and out.
  4. step : Install the new strut (7:03)
    • Bolt the strut back in, torquing your 14 mm bolts to 35-45 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 18 mm nut to 85 ft lbs
    • Replace your ABS bracket with your 10 mm socket and ratchet.
  5. step : Replace the wheel (11:15)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Hex Wrenches

  • 7mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 20mm Socket
  • 19mm Socket
  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 18mm Wrench
  • 12mm Wrench
  • 14mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 11mm Wrench
  • 15mm Wrench
  • 10mm Wrench
  • 13mm Wrench

Fits the following Makes:

Year Make Model Description
1996-1998Volkswagen Golf VW Golf L4 2.0L without ABS Brakes Steering & Suspension Kit 10 Piece Set
1996-1998Volkswagen Jetta VW Jetta L4 2.0L Steering & Suspension Kit 10 Piece Set

Part Interchange

Brand Label Part Number
Beck / Arnley 101-5205
Beck/Arnley 101-5205
DIY Solutions SUS06857
DIY Solutions SUS00294
DIY Solutions SUS07697
DIY Solutions SUS07698
MOOG K9603
MOOG K90117
MOOG Chassis Products ES3015R
MOOG Chassis Products ES3014R
MOOG Chassis Products K90117
MOOG Chassis Products K9603
Monroe 181265
Monroe 171265
Monroe 171933
Monroe Shocks & Struts 171933
Monroe Shocks & Struts 171265
Monroe Shocks & Struts 181265
Unity Automotive 15110
Unity Automotive 11410
Volkswagen 191419812
Volkswagen 191419811
Volvo 357407365

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA58792
Product Reviews
5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
98 VW Golf GL
Got the parts and started to work on car. Found out the tie rod links in the kit are not long enough for the original place on the knuckle. Please replace with the links from your tie rod kitbecause these are the right set. For the rest of the kit. The parts worked and fit in their spots. Thank you for existing 1AAuto because your prices are the best.
October 7, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

1996-98 VW Golf Jetta Steering & Suspension Kit 10 Piece Set TRQ PSA58792-1ASFK02000 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.