Specifications:

  • Fits LH (Driver Side) FRONT DOOR
  • Power operation
  • Includes Power Window Motor
  • Direct replacement
  • Built to strict quality control standards
  • 2 Pin Connector - Does NOT fit models with Auto Down Feature

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:57)
    • Pry up the window switch panel by hand
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Pry off the door pull trim piece
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips head screws inside the door pull
    • Push in the pins on the either side of the door panel with a flat blade screwdriver
    • Remove the door handle bezel and door handle with a flat blade screwdriver
    • Remove the lock rod from the door handle
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Carefully peel off the water shield
  2. step : Removing the Regulator (4:12)
    • Disconnect the window motor lead
    • Pry the clips out that hold the harness to the door with a flat blade screwdriver
    • Remove the two 10mm bolts from the window track
    • Remove the four 10mm bolts from the regulator
    • Raise the window by hand
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Hold the window in place with painter's tape
    • Pull the window regulator out through the door
  3. step : Reinstalling the Regulator (7:00)
    • Insert one of the bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolt
    • Insert the four 10mm bolts into the regulator
    • Insert the two 10mm bolts into the window track
    • Connect the window switch wiring harness
    • Connect the window motor to the lead
    • Turn the vehicle on
    • Run the motor up for 4 seconds
    • Disconnect the window motor lead
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
    • Connect the window switch wiring harness
  4. step : Reinstalling the Door Panel (10:05)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the latch cables to the door handle
    • Replace the door handle
    • Insert the Philips head screw into the door panel
    • Insert the two Phillips head screws inside the door pull
    • Insert the door pull trim piece
    • Push in the pins on the either side of the door panel
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Connect the mirror switch wiring harness
    • Push in the window switch panel by hand

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Window Regulator
Part is working great, installation video was very helpful.
July 28, 2017
Purchased
10 months ago
Toyota 4Runner Window Regulator
Good afternoon , my purchase went great. From arrival all the way to the helpful video that you have online on how to install. You guys are great !!!!!
July 5, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1998 Toyota 4Runner without Auto Down Feature with 2 Pin Style Connector Front Power Window Regulator with Motor Driver Side

This part replaces:

  • Hollander 125-58616L
  • Dorman 741-916
Part #: 1AWRG00978

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(11:18 min)